110
LSQT1093
Others

ª[REC LAMP]

The recording lamp lights during recording and
flashes when the unit receives a signal from the
remote control or when the self-timer is counting
down. When this is set to [OFF], it does not light
during recording.

ª[DISPLAY]

The screen indications are selected as shown in
the illustration below.

ª[POWER SAVE]

[OFF]: The power saving function is not
activated.
[5 MINUTES]: When about 5 minutes have
passed without any operation,
this unit automatically turns off to
prevent the battery from running
down. When you use this unit
turn it on again.
In the following cases, the unit may not turn off
even when you set this to [5 MINUTES].
– When using the AC adaptor
– When connecting the unit to a computer or
printer via the USB cable

ª[BEEP SOUND]

This allows operations such as starting and
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or
the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps/4 times
When an error occurs e.g. recording not starting.
Check the sentence displayed on the screen.
(l113)

ª[INITIAL SET]

When there is a menu that cannot be selected
due another function or mode being activated,
set to [YES] for changing the menu settings back
to the initial shipping condition.
(The language setting cannot be changed back
to the initial shipping condition.)

ª[DEMO MODE]

This item is used to start the unit demonstration.
(Only when the mode dial is at the position)
If you set this to [ON] without inserting a disc or
an SD card, this unit is automatically set to the
demonstration mode for introducing its functions.
If any button is pressed or operated, the
demonstration mode is canceled. If no
operations take place for approx. 10 minutes, the
demonstration mode automatically starts. To
terminate the demonstration mode, insert a disc
or an SD card, or set t his to [OFF]. For normal
use, set this function to [OFF].
Menus related to [ADVANCED] and [SETUP]
[OFF] [ON]
[OFF] [ON]
[OFF]
[ON]
[OFF] [5 MINUTES]
[OFF] [ON]
[YES] [NO]
[OFF] [ON]
LSQT1093ENG.book 110 ページ 2007年1月15日 月曜日 午前9時23分