Panasonic HDC-DX1PC With a printer PictBridge, Connect this unit and a printer, 100

With other products

With a printer (PictBridge)

(SD)

To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge.

(Read the operating instructions for the printer.) ≥Use the AC adaptor to free you from worrying

about the battery running down.

≥Insert an SD card with recorded images in this unit and then set the mode dial to to turn on the power.

1Connect this unit and a printer.

A

AUSB cable (supplied)

≥Insert the plugs as far as they will go. The [PictBridge] indication appears on this unit’s screen.

≥If the [PictBridge] indication does not appear or continues to flash, disconnect and then reconnect the USB cable or check

the printer, SD card and settings on this unit.

≥Do not use any other USB connection cables except the supplied one. (Operation is not guaranteed with any other USB connection cables.)

2Select a file to be printed, then press the cursor button.

The number of pictures set is displayed.

3Move the cursor button up or down to select the desired number of prints, then press the

cursor button.

≥You can set up to 9 prints.

≥To cancel the setting, set the number of prints to [0].

≥Up to 8 files displayed can be set in succession by repeating steps 2 and 3.

4Press the MENU button to display the PictBridge menus.

5Select the date print setting on [DATE PRINT].

≥If the printer is not capable of date printing, this setting is unavailable.

100

LSQT1093