72
LSQT1093
Recording
[ ]: Auto white balance adjustment
[ ]: Indoor mode (for recording under
incandescent lamps)
≥Incandescent lights, halogen lamps
[ ]: Outdoor mode
≥Outdoors under a clear sky
[ ]: Manual adjustment mode
≥Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥Lights used for wedding receptions at
hotels, stage spotlights in theatres
≥Sunrise, sunset etc.

To restore to the automatic adjustment

Set the white balance mode to [ ].
≥You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
1Select [ ], fill the screen with a

white subject.

2Move the cursor button up to
select [ ].
≥When the [ ] display changes from
flashing to on, setting is complete.
≥When the [ ] display continues flashing,
the white balance cannot be set because
the place is dark etc. In this case, use the
automatic white balance.

ªAbout the white balance sensor

The white balance sensor A detects the type of
light source during recording.
Do not cover the white balance sensor during
recording, or it may not function properly.

ªAbout the black balance

adjustment

This is one of the 3CCD system functions that
automatically adjusts the black when the white
balance is set in the manual adjustment mode.
When the black balance is adjusted, the screen
will temporarily be black. (The black balance
cannot be adjusted manually.)
1Black balance adjustment in progress.
(Flashes.)
2White balance adjustment in progress.
(Flashes.)
3Adjustment completed. (Lights up.)
≥When the [ ] display flashes, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set
the white balance for correct adjustment.
≥When setting both the white balance and the
iris/gain, set the white balance first.

To set the white balance manually

AWB
AWB
A
123
LSQT1093ENG.book 72 ページ ２００７年１月１５日　月曜日　午前９時２３分