Mitsubishi Electronics X500U Bottom side, Remote control, About laser beam, English, Lamp cover

Bottom side

1

2

Remote control

1			KEYSTONE
	COMPUTER	VIDEO	ZOOM/
2			FOCUS
	AUTO	VOLME
	POSITION
3
4	MENU		LASER
5	RIGHT CLICK
		ENTER
6
7	EXPAND	P in P	STILL

MUTE

19

18

17

16

15

14

13

12

11

10

9

8

1	Adjustment foot (Left/Right)	ENGLISH
2	Air inlet cover
3	Lamp cover

Caution:

Do not replace the lamp right after using the projector. The lamp will be very hot.

3

1Power button

2COMPUTER button

3AUTO POSITION button

4MENU button

5Right click button (For mouse)

6EXPAND button

7PinP button

8Wired remote control jack

9MUTE (Audio/Video) button

10STILL button

11Direction buttons

12ENTER button

13Mouse pointer

14LASER button

15+ , – (VOLUME) buttons

16ZOOM/FOCUS button

17VIDEO button

18KEYSTONE button

19Laser aperture

20Left click button (For mouse)

•Pressing LASER button emits the laser beam about 1 minute. Release LASER button and press it again if you wish to emits the laser beam.

AVOID EXPOSURE -LASER
		About laser beam
RADIATION IS EMITTED
FROM THIS APERTURE.		This remote control is class 2 (max. output 1 mW laser diode
		640 - 660 nm) laser equipment.
		Beam Divergence : 6m distance about 10.0mm x 10.0mm (± 6.0mm)
	20

CAUTION

LASER RADIATION

DO NOT STARE INTO BEAM

WAVE LENGTH : 640 - 660 nm

MAX OUTPUT : 1 mW

CLASS 2 LASER PRODUCT

IEC 60825-1:1993+A1:1997

CAUTION :

• Pressing the LASER button provided remote control emits laser beam. Do not look into the beam light directly. Do not point the laser beam at people. Looking the laser beam directly may damage eyesight.

• Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.

EN – 7