Troubleshooting

The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer.

PROBLEMS

CAUSE

POSSIBLE SOLUTIONS

 

 

 

The power is off.

• The air inlet slots, outlet slots or air filter is

• Remove the object.

 

clogged with dust or some objects.

 

 

POWER indicator does not light up.

• Plug the power cord into the outlet.

 

• Power cord is unplugged from the outlet.

 

• Power cord is disconnected from the projector.

• Insert the power cord into the projector.

 

• The main switch is turned off.

• Turn the main switch on.

 

• The lamp lid is open.

• Close the lamp lid.

 

POWER indicator blinks red.

• Wait for the lighting sequence.

 

• The projector has been turned on again too soon

 

after having been turned off.

• Turn the power switch on and off several times.

 

• When the power switch was turned off while

 

the fan was running, during or after lamp

 

 

operation.

 

 

• The room temperature is too high.

• Refer to "Indicators" on page 26.

 

(Does the LAMP indicator show an unusual

 

 

condition?)

 

 

• Lamp is no longer working.

• Replace the lamp with a new one.

 

POWER indicator blinks between red and green.

 

 

• The filter cover is not closed.

• Close the cover correctly.

 

• When the LAMP indicator or the TEMP

• Contact your dealer.

 

indicator is either on or blinking, the main unit

 

 

requires repairs.

 

 

 

 

No picture appears

• Lens is covered by lens cap.

• Take the lens cap off.

on the screen.

• When the LAMP indicator or the TEMP

• Replace the lamp with a new one.

 

indicator is either on or blinking, the main unit

 

 

requires repairs.

 

 

• The equipment connected to this projector is not turned on.

• Turn on the connected equipment.

 

• Hookup is not made correctly with other equipment.

• Confirm the hookup.

 

• The input source is not selected correctly.

• Select the correct source according to the equip-

 

• The INPUT SELECT switch is not selected correctly.

ment connected to this projector.

 

• Select the correct position.

 

 

 

The image is

• The air inlet slots, outlet slots or air filter is

• Remove the object and turn off the main power

turned off.

clogged with dust or some objects.

switch. After about 10 minutes, Turn the pro-

 

(In this case, the TEMP indicator does not light up.)

jector on.

The image is

• The projector is not at a right angle to the screen.

• Adjust the angle of the projector to make a right

distorted.

 

angle to the screen. See page 12.

The image is dark.

• Brightness, tint and color are not adjusted correctly.

• Adjust brightness, tint and color correctly.

The image is

• The projecting distance is beyond the focused area.

• Adjust the projecting distance. See page 9.

blurred.

• Lens is dirty.

• Clean lens.

 

• Screen size exceeds screen size specifications.

Reduce screen size to within 40" to 300".

 

• Brightness and contrast are not adjusted correctly.

• Adjust brightness, contrast.

 

• FINE adjustment is not made correctly.

• Make FINE adjustment.

 

• Tracking is not adjusted.

• Adjust tracking.

 

• The projector is not at a right angle to the screen.

• Adjust the angle of the projector to make a

 

 

right angle to the screen. See page 12.

The image remains

• When you see the stationary image for a long time, it may remain on the screen if you change the

blurred.

image. It is not a breakdown. The blurred image will disappear in a few minutes.

Red, blue or green dots are

• It is normal.

 

viewed on the text of image.

 

 

The image is dis-

• The cable for connection with other equipment

• Plug the connecting cable securely into the

torted on the screen

is not plugged securely into the terminal.

terminal. See pages 10-11.

and noise is heard.

• The projector is installed too close to other

• Install the projector far away from other equipment.

 

equipment.

 

No sound is heard.

• Volume is not turned up.

• Turn up the volume.

 

• Connection to other equipment is not made correctly.

• Check connections. See pages 10-11.

Nothing is displayed on

• The PC monitor is not turned on.

• Turn on the monitor.

the PC monitor.

 

Warm air comes out of

• This is typical of the LCD projector.

 

the exhaust vents.

 

 

Adjustments cannot be

• The operation is incorrectly made due to noise or

• Press the reset button on the Terminal board.

interference.

See page 15.

made.

 

 

is displayed.

• This mark is displayed when an invalid operation

is executed (for example, when the COMPUTER or

 

VIDEO button is pressed while the menu is displayed). This is not failure.

ENGLISH

EN – 25

Page 25
Image 25
Mitsubishi Electronics X500U user manual Troubleshooting

X500U specifications

The Mitsubishi Electronics X500U is a cutting-edge projector designed to cater to a wide range of professional and educational environments. This compact device is renowned for its impressive image quality, advanced technologies, and versatile features that make it an ideal choice for presentations, lectures, and multimedia experiences.

One of the main features of the X500U is its high brightness capacity, capable of delivering up to 5000 lumens. This ensures that images remain vibrant and clear even in well-lit rooms, making it well-suited for various settings. The projector utilizes a full HD resolution of 1920 x 1080, providing crystal-clear images with stunning detail. This resolution is particularly beneficial for displaying intricate graphs, charts, and videos, providing a rich viewing experience for any audience.

The X500U incorporates advanced DLP (Digital Light Processing) technology, which enhances color accuracy and contrast. With a high dynamic contrast ratio, the projector produces deep blacks and bright whites, ensuring that every detail is captured, even in the darkest scenes. This technology minimizes the potential for color degradation over time, ensuring that the projector maintains its performance over extended usage.

Another significant feature is the X500U's connectivity options. It includes multiple HDMI ports, USB slots, and VGA inputs, allowing seamless integration with a variety of devices such as laptops, Blu-ray players, and mobile devices. This versatility ensures that users can easily switch between different input sources without hassle.

The projector also boasts a range of user-friendly features, such as a quick-start option, which allows users to begin presenting almost immediately. Furthermore, with its built-in speaker system, the X500U provides adequate audio output for smaller rooms, eliminating the need for external speakers in certain situations.

In terms of portability, the X500U is designed to be lightweight and compact. This means it can be easily transported between locations, making it an excellent choice for traveling professionals and educators.

Lastly, the X500U is equipped with an eco-friendly mode that extends lamp life significantly, often reaching up to 15,000 hours. This feature not only reduces maintenance costs but also minimizes environmental impact, aligning with modern sustainability goals.

In conclusion, the Mitsubishi Electronics X500U is a versatile and robust projector, packed with features that enhance the viewing experience while providing convenience and efficiency for users across various applications.