71
LSQT1093
Recording
≥The center of the screen is not enlarged if
[MF ASSIST] is set to [OFF].
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down
again to the FOCUS position.
≥You can also restore the auto focusing by
setting the AUTO/MANUAL/FOCUS switch to
AUTO.
≥The subject may not be in focus when zoomed
in if focusing with a wide angle. First, zoom in
on the subject, and then focus on it.
The center of the screen is enlarged during
manual focus adjustment. This allows you to
focus on the subject more easily.
≥MF assist does not work if the zoom
magnification is more than 12k.
≥The part of the screen that is enlarged is not
enlarged on the image actually recorded.
≥The zebra pattern does not appear on the part
of the screen that is enlarged when [ZEBRA] is
[ON].
(RAM) (-RW) (-R) (-R\DL) (SD)
The automatic white balance function may not
reproduce natural colors depending on the
scenes or lighting conditions. If so, you can
adjust the white balance manually.
¬Rotate the mode dial to select .
1Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2Move the cursor button up to
select [ ].
3Move the cursor button left or

right to select the white balance

mode.

About the MF assist function

White balance

This is for recording in natural colors.
LSQT1093ENG.book 71 ページ ２００７年１月１５日　月曜日　午前９時２３分