Aiwa Z-L70 manual Surround Speakers Jacks, Press VIDEO/AUX, To change a source name on the display

—CD DIGITAL OUT (OPTICAL)

POWER—

—VIDEO/AUX IN

—SURROUND SPEAKERS

Refer to the operating instructions of the connected equipment for details.

●The connecting cords are not supplied. Obtain the necessary connecting cords.

●Consult your local Aiwa dealer for optional equipment.

This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (LD player, VCR, TV, etc.)

Connect the red plug to VIDEO/AUX R jack, and the white plug to VIDEO/AUX L jack.

This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment (DAT deck, MD recorder, etc.)

Remove the dust cap @ from CD DIGITAL OUT (OPTICAL) jack, then connect an optical cable plug to CD DIGITAL OUT (OPTICAL) jack.

When CD DIGITAL OUT (OPTICAL) jack is not being used

Attach the supplied dust cap.

SURROUND SPEAKERS JACKS

Connect optional surround speakers with 8 ohms to 16 ohms impedance to the jacks.

To play equipment connected to the VIDEO/AUX IN jacks, proceed as follows:

1 Press VIDEO/AUX.

“VIDEO”appears on the display.

2 Play the connected equipment.

To change a source name on the display

When VIDEO/AUX is pressed, “VIDEO”is displayed initially. It can be changed to “AUX”or “TV.

With the power on, press POWER while pressing VIDEO/AUX. Repeat the procedure to select one of the names.

To adjust the sound level of equipment connected to the VIDEO/AUX IN jacks

When the sound level of the external source is much higher or much lower than that of other function sources, adjust it as follows.

1Press VIDEO/AUX and play the equipment.

2Press - or * until the sound level becomes the same as that of other function sources.

During recording, the sound level can not be adjusted.

ENGLISH 27