Aiwa Z-L70 ““---u, PressTUNER/BAND to select the FM or AM band, To change the AM tuning interval

““---u

1 PressTUNER/BAND to select the FM or AM band.

When TUNER/BAND is pressed while the power is off, the power is turned on directly (Direct Play Function).

2 Press TUNER PRESET repeatedly to select the manual tuning mode.

Each time the button is pressed, the following three tuning modes are selected cyclically.

@Preset tuning mode: The preset number flashes.

@Auto search made: “SEARCH”is displayed.

@3Manual tuning Imode: “SEARCH” is not displayed and the preset number does not flash.

Frequency SEARCH

Preset number

m

The preset tuning mode is skipped if no station is preset.

3 Turn MULTI JOG clockwise or counter-clockwise to tune into a station.

The freauency changes as you turn MULTI JOG. When a station is rece-ived, “;UNE” is displayed for 2 seconds. During FM stereo reception, (11011]is displayed.

[[10)))

. + DOWN and b+UP are also available to tune in to a station.

To search for a station quickly (Auto Search)

Press TUNER PRESET repeatedly to display “SEARCH”(auto

search mode), and turn MULTI JOG clockwise or

#=%$$

counterclockwise until the frequency starts to change rapidly. -~=:s,

To stop the Auto Search manually, turn MULTI JOG a little in either direction.

●The Auto Search may not stop at stations with very weak ~~ signals.

●u DOWN and -UP are also available to search for a w

station. Keep 44 DOWN or -UP pressed until the tuner starts searching. Press the button to stop the search manually.

When an FM stereo broadcast contains noise

Press MONO TUNER on the remote control so that “MONO” appears on the display.

Noise is reduced, although reception is monaural.

MONO

To restoredisappearsandstereo reception, press MONO TUNER so that

‘(MONO”“STEREO” displayed for 2 seconds.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press POWER while pressing +~ on the unit. To reset the interval, repeat this procedure.

ENGLISH 11