Aiwa Z-L70 Selecting The Programmed Equalization Curve, Manually, Press GEQ FREQ HIGH, English

MI-M4	\	F====%%
LATIN,
CLASSIC	I	GEQ

!’,-%”,’,., ,, P,” ‘, ~.,m,wd‘~%‘la.. 9-. ,$,! ,: r,,, .fv., i ,-w,r,r,w., !* ., , -’ : ‘,,.’ ,.. ., - ‘-

SELECTING THE PROGRAMMED EQUALIZATION CURVE

This unit provides the following 4 different equalization curves:

ROCK: Powerful sound emphasizing treble and bass

POP: More presence in the vocals and midrange

LATIN: Accented higher frequencies for Iatin-type music

CLASSIC: Enriched sound with heavy bass and fine treble

Press one of the graphic equalizer preset buttons.

The PRGM indicator turns on.

The selected program mode indicator flashes and that program mode appears for 4 seconds on the display.

To cancel the selected mode

Press the selected graphic equalizer preset button. “GEQOFF” is displayed and the equalization curve becomes fiat.

To select with the remote control

Press GEQ repeatedly until the desired program mode is

displayed.
ROCK—	POP —	LATIN —		CLASSIC —
‘------------	PRGM mode		-----------	J
GEQ OFF+GEQ	~M4+-GEQ M3+-GEQ
r(cancel)				M2+GEQ MI*
	---------MANUAL		mode -------

MANUALLY

The equalization curve can be customized to suit your preference.

1 Press GEQ FREQ (LOW).

The lowest level frequency indicator flashes for 8 seconds.

2 Within 8 seconds, turn MULTI JOG to adjust the level of the lowest frequency.

3Press GEQ FREQ (HIGH).

The highest level frequency indicator flashes for 8 seconds.

4Within 8 seconds, turn MULTI JOG to adjust the level of the highest frequency.

The frequency level indicators between the lowest and the highest are adjusted accordingly.

. ...,..”, . .. “w,...,,

MEMORIZING” ‘THE--NEW ‘EQUALIZATION CURVES

Up to 4 customized equalization curves can be stored on the J MANUAL mode Ml -M4.

1 Set a new equalization curve with GEQ FREQ and

MULTI JOG.

See “SETTING A NEW EQUALIZATION CURVE MANUALLY.

The created equalization curve is displayed for 8 seconds.

2 Within 8 seconds, press ENTER.

“MEMORY”is displayed and all the manual mode indicators flash for 8 seconds. Go to step 3 within those 8 seconds.

●If this step is not completed within 8 seconds, press GEQ FREQ first to display “GEQON”. Then press ENTER within 8 seconds.

3Press one of the graphic equalizer preset buttons MI-M4.

The MANUAL indicator turns on and the equalization curve is stored.

To select the stored equalization curve

Press one of the graphic equalizer preset buttons M1–M4.

1() ENGLISH