Aiwa Z-L70 manual Built-In Subwoofer System, Press ECO, Press ENTER wiithin 4 seconds, English

Setting this unit to power economizing mode reduces power consumption as follows.

●When the power is turned off, all the display lights turn off, and only the indicator on the POWER button lights.

However, if the clock is not set, the game Demo (page 8), will begin when the power is turned off.

●If CD or tape does not play for 10 minutes or if there is no audio input from any connected external equipment for 10 minutes when VI DEO/AUX or PHONO is selected as the

source, the power ShlJk off.

●The display brightens only when operating the unit. When the unit has not been used for 10 seconds, the brightness level switches to the mode previously selected in “DIMMODE”. (Page 6)

(If the display brightness level is set to “DIM-OFF”, the brightness does not change. When the level is “DIMMER3“, the button lamps are also turned off.)

To provide reinforcement for the ultra-low frequencies, in addition to the Left/Right 2-channel amplifier used to reproduce mid-to- high-range frequencies, this system incorporates a second L/R 2-channel amplifier just for reproduction of ultra-low frequencies

—making it, in effect, a 4-amplifier system. By utilizing discrete amplifiers for mid to-high-frequencies and low frequencies, high- quality sonic reproduction that is virtually free from distortion can be realized.

This Multi Amplifier System, which utilizes independent circuitry for the different frequency ranges, enables superb sonic reproduction free from distortion.

,-”.,’:,,,,., ., ~,,,, ,, =..- -,-: h. EH,=, ?...,=..,,’. ,’, .-.,.,’ ,.!, -. !’ .-,’

BUILT-IN SUBWOOFER SYSTEM

The built-in subwoofer system has a separate subwoofer cavity area that is part of the loudspeaker cabinet structure, which acts as a sonic filter to cut distortion components. (In the Multi Amplifier System, the ultra-low frequency signals transmitted from their own independent amplifier are reproduced in this area.) This separate construction gives a clear, rich definition to bass reproduction and it can realize clear, well-defined mid-to-high frequency signals,

And AlWA’s built-in subwoofer system incorporates a subwoofer capable of powerful, satisfying bass performance with true stereo separation.

‘@ui!Gin$Mb$ogfer~Mtilk-Arn~ifier Amplifiers for Mid-to-high

range frequencies

1 Press ECO.

“ECOMODE” will be displayed.

Subwoofer’Cavity area

2Press ENTER wiithin 4 seconds.

The current power-economizing mode status will be displayed. If the power-economizing mode is OFF: ECO OFF

If the power-economizing mode is ON: E=COON

3Turn MULTI JOG within 4 seconds to switch the

power-economizing mode on or off.

Examp/e: When “ON”is selected

The mode will be automatically set after 4 seconds. It will also be set if ENTER is pressed within 4 seconds after step 3.

Standby power consumption

If the power-economizing mode is OFF: 31 W

If the power-economizing mode is ON: 2.5 W

m

To view the clock, press CLOCK so that the time is displayed for 4 seconds.

—

Amplifiers for Low frequencies

ENGLISH 7