Aiwa Z-L70 Main unit CX-ZL70, section, Tuning range, MHz to 108 MHz, Usable sensitivity, 13.2 dBf

Main unit CX-ZL70
FM tuner	section
Tuning range				87.5 MHz to 108 MHz
Usable sensitivity		(IHF)		13.2 dBf
Antenna	terminals			75 ohms (unbalanced)
AM tuner	section
Tuning range				530 kHz to 1710 kHz (10 kHz
				step)
				531 kHz to 1602 kHz (9 kHz
				step)
Usable sensitivity				350 pV/m
Antenna				Loop antenna
Amplifier	section
Mid-high frequency amplifier
Pow&	output	-	-	30 W + 30 W (200 Hz – 20 kHz,
				THD less than 1 Y., 6 ohms)
Total harmonic distortion 0.15 % (15 W, 1 kHz, 6 ohms)
Low frequency amplifier
Power	output			90 W + 90 W (50 Hz – 200 Hz,
				THD less than 1 %, 6 ohms)

Total harmonic distortion 0.15 % (45 W, 135 Hz, 6 ohms)

Inputs		VIDEO/AUX: 310 mV
		(adjustable)
		PHONO: 400 mV (47 kohms)
		MIC 1, MIC 2: 1.4 mV (20
		kohms)
outputs		CD DIGITAL OUT (OPTICAL)
		SPEAKERS: accept speakers
		of 6 ohms or more
		SURROUND SPEAKERS:
		accept speakers of 8-16 ohms
		or more
		PHONES (stereo jack):
		accepts headphones		of 32
		ohms or more
Cassette	deck section
Track format		4 tracks, 2 channels		stereo
Frequency	response	CrOz tape: 50 Hz -16000			Hz
		Normal tape: 50 Hz -15000
		Hz
Signal-to-noise ratio		50 dB (CrOz tape	peak level,
		above 400 Hz)
Recording	system	AC bias
Heads		Deck 1: Playback	head x 1
		Deck 2: Recording/playbacW
		erase head x 1
Compact	disc player	section
Laser		Semiconductor laser (k=			780

nm)

Speaker system SX-WZL70
Cabinet type	3 way, built-in	subwoofer
Speakers	Subwoofer:
	220 mm (83/4in.) cone type
	Full range:
	120 mm (43/4 in.) cone type
	Super tweeter:
	20 mm (’3/18 in.) ceramic type
Impedance	6 ohms
Output sound pressure level 89 dB/W/m
Dimensions (W x H x D)	290 x 444x 296 mm
	(i 1’/2 x 17’/zx	113/4in.)
Weight	6.8 kg (14 Ibs. 16 OZ.)

Specifications and external appearance are subject to change without notice.

COPYRIGHT

Please check the laws on copyright relating to recordings from discs, radio or external tape for the country in which the machine is being used.

BMSYSTEM

The word “BBE”and the “BBEsymbol” are trademarks of BBE Sound, Inc.

Under license from BBE sound, Inc.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product.

D-A converter

Signal-to-noise ratio Harmonic distortion Wow and flutter

General

Power requirements Power consumption Dimensions of main unit (W XHXD)

Weight of main unit

1 bit dual

85 dB (1 kHz, O dB)

0.05Yo (1 kHz, O dB) Unmeasurable

120 V AC, 60 HZ

180W

360 x 394.5 x 387.5 mm

(141/4 X 155/8X 15’/8 in.)

10.5 kg (23 lb. 2 OZ.)

ENGLISH 29