Aiwa Z-L70 8*,m, Repeat for the rest of the tracks for side A, Insert the tape into Deck, sefyu

3

4

5

2

sefyu	alsc	Program number	Remaining time on side A
			I

Selected track number Programmed track numb~rs

6 Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time cannot be programmed.

8

8*,m

■

7 Press CD EDIT/CHECK to select side B and program the tracks for side B.

After confirming Bon the display, repeat step 5.

Tape side B (reverse side)

In the programmed edit recording function, the tracks can be programmed while checking the remaining time on each side of the tape as the tracks are programmed.

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side.

Use the remote control from steps 3 to 8.

1 Insert the tape into Deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

2 Press CD and load the disc(s).

3 Press CD EDIT/CHECK twice.

“PRGMEDIT” and “PRGM”light up on the display.

PRIGM PRGM EDIT

8 Press ./O REC/REC MUTE and then press +> within 2 seconds to start recording.

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side A ends, recording on the back side B starts.

To stop recording

Press W. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers Before recording, press CD EDIT/CHECK to select side A or B, and press 44 or P+ repeatedly.

Disc number Program number

When “Al”is displayed, press CD EDIT/CHECK again.

4 Press the numbered buttons O-9to designate the tape length.

10 to 99 minutes can be specified.

	Maximum recording
Tape length	time for side A

Tape side(A)

5Press DISC DIRECT PLAY,then press one of the numbered buttons 1-5 within 3 seconds to select a disc. Then, press the numbered buttons O-9

and +1Oto program a track.

Example: To select the 10th track of disc 2, press DISC DIRECT PLAY and 2, then +10 and O.

Track number F’rogrammed track numbers

To change the program of each side

Press CD EDIT/CHECK to select side A or B, and press

■CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press ■ CLEAR twice so that “EDIT”disappears on the display.

Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

ENGLISH 21