Cisco Systems 3750E Default System Message Logging Configuration, Disabling Message Logging, 32-4

Chapter 32 Configuring System Message Logging

Configuring System Message Logging

*Mar 1 18:46:11: %SYS-5-CONFIG_I: Configured from console by vty2 (10.34.195.36)

18:47:02: %SYS-5-CONFIG_I: Configured from console by vty2 (10.34.195.36)

*Mar 1 18:48:50.483 UTC: %SYS-5-CONFIG_I: Configured from console by vty2 (10.34.195.36)

Default System Message Logging Configuration

Table 32-2shows the default system message logging configuration.

Table 32-2	Default System Message Logging Configuration
Feature		Default Setting
System message logging to the console		Enabled.
Console severity		Debugging (and numerically lower levels; see
		Table 32-3 on page 32-10).
Logging file configuration		No filename specified.
Logging buffer size		4096 bytes.
Logging history size		1 message.
Time stamps		Disabled.
Synchronous logging		Disabled.
Logging server		Disabled.
Syslog server IP address		None configured.
Server facility		Local7 (see Table 32-4 on page 32-14).
Server severity		Informational (and numerically lower levels; see
		Table 32-3 on page 32-10).

Disabling Message Logging

Message logging is enabled by default. It must be enabled to send messages to any destination other than the console. When enabled, log messages are sent to a logging process, which logs messages to designated locations asynchronously to the processes that generated the messages.

Beginning in privileged EXEC mode, follow these steps to disable message logging. This procedure is optional.

	Command	Purpose
Step 1
	configure terminal	Enter global configuration mode.
Step 2
	no logging console	Disable message logging.
Step 3
	end	Return to privileged EXEC mode.
Step 4
	show running-config	Verify your entries.
	or
	show logging
Step 5
	copy running-config startup-config	(Optional) Save your entries in the configuration file.

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

32-4 OL-9775-02