Cisco Systems 3750E Show ip interface interface-id, Show running-config interface interface-id

Chapter 34 Configuring Network Security with ACLs

Displaying IPv4 ACL Configuration

Table 34-2 Commands for Displaying Access Lists and Access Groups (continued)

Command	Purpose
show ip interface interface-id	Display detailed configuration and status of an interface. If IP is enabled
	on the interface and ACLs have been applied by using the ip access-group
	interface configuration command, the access groups are included in the
	display.
show running-config [interface interface-id]	Displays the contents of the configuration file for the switch or the
	specified interface, including all configured MAC and IP access lists and
	which access groups are applied to an interface.
show mac access-group [interface interface-id]	Displays MAC access lists applied to all Layer 2 interfaces or the specified
	Layer 2 interface.

You can also display information about VLAN access maps or VLAN filters. Use the privileged EXEC commands in Table 34-3to display VLAN map information.

Table 34-3 Commands for Displaying VLAN Map Information

Command	Purpose
show vlan access-map [mapname]	Show information about all VLAN access maps or the
	specified access map.
show vlan filter [access-map name vlan vlan-id]	Show information about all VLAN filters or about a specified
	VLAN or VLAN access map.

	Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02		34-41