Cisco Systems 3750E Configuring Smartports Macros, Default Smartports Macro Configuration, 12-2

Chapter 12 Configuring Smartports Macros

Configuring Smartports Macros

Table 12-1	Cisco-Default Smartports Macros (continued)
Macro Name1		Description
cisco-phone		Use this interface configuration macro when connecting a desktop device such as a
		PC with a Cisco IP Phone to a switch port. This macro is an extension of the
		cisco-desktopmacro and provides the same security and resiliency features, but with
		the addition of dedicated voice VLANs to ensure proper treatment of delay-sensitive
		voice traffic.
cisco-switch		Use this interface configuration macro when connecting an access switch and a
		distribution switch or between access switches connected using small form-factor
		pluggable (SFP) modules.
cisco-router		Use this interface configuration macro when connecting the switch and a WAN
		router.
cisco-wireless		Use this interface configuration macro when connecting the switch and a wireless
		access point.

1. Cisco-default Smartports macros vary depending on the software version running on your switch.

Cisco also provides a collection of pretested, Cisco-recommended baseline configuration templates for Catalyst switches. The online reference guide templates provide the CLI commands that you can use to create Smartports macros based on the usage of the port. You can use the configuration templates to create Smartports macros to build and deploy Cisco-recommended network designs and configurations. For more information about Cisco-recommended configuration templates, see this Smartports website:

http://www.cisco.com/go/smartports

Configuring Smartports Macros

You can create a new Smartports macro or use an existing macro as a template to create a new macro that is specific to your application. After you create the macro, you can apply it globally to a switch or to a switch interface or range of interfaces.

These sections contain this configuration information:

•Default Smartports Macro Configuration, page 12-2

•Smartports Macro Configuration Guidelines, page 12-3

•Creating Smartports Macros, page 12-4

•Applying Smartports Macros, page 12-5

•Applying Cisco-Default Smartports Macros, page 12-6

Default Smartports Macro Configuration

There are no Smartports macros enabled.

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

12-2 OL-9775-02