Cisco Systems 3750E manual Device Required Configuration

Chapter 4 Configuring Cisco IOS CNS Agents

Configuring Cisco IOS Agents

Table 4-1 Prerequisites for Enabling Automatic Configuration

Device	Required Configuration
Access switch	Factory default (no configuration file)
Distribution switch	•	IP helper address
	• Enable DHCP relay agent
	• IP routing (if used as default gateway)
DHCP server	•	IP address assignment
	• TFTP server IP address
	• Path to bootstrap configuration file on the TFTP server
	• Default gateway IP address
TFTP server	• A bootstrap configuration file that includes the CNS
		configuration commands that enable the switch to
		communicate with the Configuration Engine
	• The switch configured to use either the switch MAC address
		or the serial number (instead of the default hostname) to
		generate the ConfigID and EventID
	• The CNS event agent configured to push the configuration file
		to the switch
CNS Configuration Engine	One or more templates for each type of device, with the ConfigID
	of the device mapped to the template.

Note For more information about running the setup program and creating templates on the Configuration Engine, see the Cisco Configuration Engine Installation and Setup Guide, 1.5 for Linux at this URL: http://www.cisco.com/en/US/products/sw/netmgtsw/ps4617/products_installation_and_configuration_ guide_book09186a00803b59db.html

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

OL-9775-02 4-7