Cisco Systems 3750E manual Using a Filter, Xxxvii

Contents

		Controlling Source Information that Your Switch Originates								43-9
		Redistributing Sources	43-9
		Filtering Source-Active Request Messages						43-11
		Controlling Source Information that Your Switch Forwards								43-12
		Using a Filter 43-12
		Using TTL to Limit the Multicast Data Sent in SA Messages									43-14
		Controlling Source Information that Your Switch Receives								43-14
		Configuring an MSDP Mesh Group			43-16
		Shutting Down an MSDP Peer		43-16
		Including a Bordering PIM Dense-Mode Region in MSDP							43-17
		Configuring an Originating Address other than the RP Address									43-18
		Monitoring and Maintaining MSDP		43-19
		Configuring Fallback Bridging
C H A P T E R 44			44-1
		Understanding Fallback Bridging		44-1
		Fallback Bridging Overview	44-1
		Fallback Bridging and Switch Stacks				44-3
		Configuring Fallback Bridging	44-3
		Default Fallback Bridging Configuration				44-4
		Fallback Bridging Configuration Guidelines					44-4
		Creating a Bridge Group 44-4
		Adjusting Spanning-Tree Parameters				44-6
		Changing the VLAN-BridgeSpanning-Tree Priority							44-7
		Changing the Interface Priority			44-7
		Assigning a Path Cost	44-8
		Adjusting BPDU Intervals		44-9
		Disabling the Spanning Tree on an Interface						44-11
		Monitoring and Maintaining Fallback Bridging					44-11
		Troubleshooting 45-1
C H A P T E R 45
		Recovering from a Software Failure		45-2
		Recovering from a Lost or Forgotten Password					45-3
		Procedure with Password Recovery Enabled					45-5
		Procedure with Password Recovery Disabled 45-7
		Preventing Switch Stack Problems		45-8
		Recovering from a Command Switch Failure				45-9
		Replacing a Failed Command Switch with a Cluster Member								45-10
		Replacing a Failed Command Switch with Another Switch								45-11
				Catalyst 3750-E and 3560-E Switch Software Configuration Guide
	OL-9775-02											xxxvii