Cisco Systems 3750E manual Monitoring Flex Links and the MAC Address-Table Move Update, 21-11

Chapter 21 Configuring Flex Links and the MAC Address-Table Move Update Feature

Monitoring Flex Links and the MAC Address-Table Move Update

	Command	Purpose
Step 3
	end	Return to privileged EXEC mode.
Step 4
	show mac address-table move update	Verify the configuration.
Step 5
	copy running-config startup config	(Optional) Save your entries in the switch startup
		configuration file.

To disable the MAC address-table move update feature, use the no mac address-table move update receive configuration command. To display the MAC address-table move update information, use the show mac address-table move update privileged EXEC command.

This example shows how to configure a switch to get and process MAC address-table move update messages:

Switch# configure terminal

Switch(conf)# mac address-table move update receive

Switch(conf)# end

Monitoring Flex Links and the MAC Address-Table Move Update

Table 21-1shows the privileged EXEC commands for monitoring the Flex Links configuration and the MAC address-table move update information.

Table 21-1 Flex Links and MAC Address-Table Move Update Monitoring Commands

Command	Purpose
show interface	Displays the Flex Link backup interface configured for an interface or
[interface-id]switchport	all the configured Flex Links and the state of each active and backup
backup	interface (up or standby mode).
show mac address-table	Displays the MAC address-table move update information on the
move update	switch.

	Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02		21-11