Cisco Systems 3750E Snmp-server group groupname v1 v2c, Auth noauth priv read readview, 33-11

Chapter 33 Configuring SNMP

Configuring SNMP

	Command	Purpose
Step 3
	snmp-server group groupname {v1 v2c v3	Configure a new SNMP group on the remote device.
	{auth noauth priv}} [read readview]	• For groupname, specify the name of the group.
	[write writeview] [notify notifyview] [access
		• Specify a security model:
	access-list]
		– v1 is the least secure of the possible security models.
		– v2c is the second least secure model. It allows
		transmission of informs and integers twice the normal
		width.
		– v3, the most secure, requires you to select an
		authentication level:
		auth—Enables the Message Digest 5 (MD5) and the
		Secure Hash Algorithm (SHA) packet authentication.
		noauth—Enables the noAuthNoPriv security level. This
		is the default if no keyword is specified.
		priv—Enables Data Encryption Standard (DES) packet
		encryption (also called privacy).
		Note The priv keyword is available only when the cryptographic
		universal software image is installed.
		• (Optional) Enter read readview with a string (not to exceed 64
		characters) that is the name of the view in which you can only
		view the contents of the agent.
		• (Optional) Enter write writeview with a string (not to exceed
		64 characters) that is the name of the view in which you enter
		data and configure the contents of the agent.
		• (Optional) Enter notify notifyview with a string (not to exceed
		64 characters) that is the name of the view in which you
		specify a notify, inform, or trap.
		• (Optional) Enter access access-listwith a string (not to exceed
		64 characters) that is the name of the access list.

	Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02		33-11