Cisco Systems 3750E manual Accessing the CLI of a Specific Stack Member, Command Description

Chapter 5 Managing Switch Stacks

Accessing the CLI of a Specific Stack Member

To remove provisioned information and to avoid receiving an error message, remove the specified switch from the stack before you use the no form of this command.

This example shows how to provision a Catalyst 3750-E switch with a stack member number of 2 for the switch stack. The show running-configcommand output shows the interfaces associated with the provisioned switch:

Switch(config)# switch 2 provision WS-C3750E-24TD

Switch(config)# end

Switch# show running-config include switch 2

!

interface GigabitEthernet2/0/1

!

interface GigabitEthernet2/0/2

!

interface GigabitEthernet2/0/3

<output truncated>

Accessing the CLI of a Specific Stack Member

Note This task is available only from the stack master. This task is only for debugging purposes.

You can access all or specific stack members by using the remote command {all stack-member-number} privileged EXEC command. The stack member number range is 1 to 9.

You can access specific stack members by using the session stack-member-numberprivileged EXEC command. The stack member number range is 1 to 9. The stack member number is appended to the system prompt. For example, Switch-2#is the prompt in privileged EXEC mode for stack member 2, and the system prompt for the stack master is Switch. Enter exit to return to the CLI session on the stack master. Only the show and debug commands are available in a CLI session to a specific stack member.

Displaying Switch Stack Information

To display configuration changes that you save after you reset a specific stack member or the switch stack, use the privileged EXEC commands listed in Table 5-4.

Table 5-4	Commands for Displaying Switch Stack Information
Command		Description
show platform stack-manager all		Displays all switch stack information.
show switch		Displays summary information about the switch stack,
		including the status of provisioned switches.
show switch stack-member-number		Displays information about a specific member.
show switch detail		Displays detailed information about the stack ring.
show switch neighbors		Display the neighbors for the entire switch stack.

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

5-24 OL-9775-02