Cisco Systems 3750E Displaying Rmon Status, Rmon collection stats index owner ownername, 31-6

Chapter 31 Configuring RMON

Displaying RMON Status

	Command	Purpose
Step 3
	rmon collection stats index [owner ownername]	Enable RMON statistic collection on the interface.
		• For index, specify the RMON group of statistics. The range
		is from 1 to 65535.
		• (Optional) For owner ownername, enter the name of the
		owner of the RMON group of statistics.
Step 4
	end	Return to privileged EXEC mode.
Step 5
	show running-config	Verify your entries.
Step 6
	show rmon statistics	Display the contents of the switch statistics table.
Step 7
	copy running-config startup-config	(Optional) Save your entries in the configuration file.

To disable the collection of group Ethernet statistics, use the no rmon collection stats index interface configuration command.

This example shows how to collect RMON statistics for the owner root:

Switch(config)# interface gigabitethernet2/0/1

Switch(config-if)#rmon collection stats 2 owner root

Displaying RMON Status

To display the RMON status, use one or more of the privileged EXEC commands in Table 31-1:

Table 31-1	Commands for Displaying RMON Status
Command		Purpose
show rmon		Displays general RMON statistics.
show rmon alarms		Displays the RMON alarm table.
show rmon events		Displays the RMON event table.
show rmon history		Displays the RMON history table.
show rmon statistics		Displays the RMON statistics table.

For information about the fields in these displays, see the “System Management Commands” section in

the Cisco IOS Configuration Fundamentals Command Reference, Release 12.2.

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

31-6 OL-9775-02