Cisco Systems 3750E manual 38-82

Chapter 38 Configuring IP Unicast Routing

Configuring Protocol-Independent Features

	Command	Purpose
Step 12
	set dampening halflife reuse suppress	Set BGP route dampening factors.
	max-suppress-time
Step 13
	set local-preference value	Assign a value to a local BGP path.
Step 14 set origin {igp egp as incomplete}		Set the BGP origin code.
Step 15 set as-path {tag prepend as-path-string}		Modify the BGP autonomous system path.
Step 16 set level {level-1 level-2 level-1-2 stub-area		Set the level for routes that are advertised into the
	backbone}	specified area of the routing domain. The stub-areaand
		backbone are OSPF NSSA and backbone areas.
Step 17
	set metric metric value	Set the metric value to give the redistributed routes (for
		EIGRP only). The metric value is an integer
		from -294967295 to 294967295.
Step 18
	set metric bandwidth delay reliability loading mtu	Set the metric value to give the redistributed routes (for
		EIGRP only):
		• bandwidth—Metric value or IGRP bandwidth of the
		route in kilobits per second in the range 0 to
		4294967295
		• delay—Route delay in tens of microseconds in the
		range 0 to 4294967295.
		• reliability—Likelihood of successful packet
		transmission expressed as a number between 0 and
		255, where 255 means 100 percent reliability and 0
		means no reliability.
		• loading— Effective bandwidth of the route expressed
		as a number from 0 to 255 (255 is 100 percent
		loading).
		• mtu—Minimum maximum transmission unit (MTU)
		size of the route in bytes in the range 0 to
		4294967295.
Step 19
	set metric-type {type-1 type-2}	Set the OSPF external metric type for redistributed routes.
Step 20
	set metric-type internal	Set the multi-exit discriminator (MED) value on prefixes
		advertised to external BGP neighbor to match the IGP
		metric of the next hop.
Step 21
	set weight	Set the BGP weight for the routing table. The value can
		be from 1 to 65535.
Step 22
	end	Return to privileged EXEC mode.
Step 23
	show route-map	Display all route maps configured or only the one
		specified to verify configuration.
Step 24
	copy running-config startup-config	(Optional) Save your entries in the configuration file.

To delete an entry, use the no route-mapmap tag global configuration command or the no match or no set route-map configuration commands.

You can distribute routes from one routing domain into another and control route distribution.

	Catalyst 3750-E and 3560-E Switch Software Configuration Guide
38-82	OL-9775-02