UNIT ASSEMBLY
How to Assemble
A. Clean and sterilize all unit parts before the first use or after a long storage period.
B. Fill the medication cup before plugging in the unit and turning on the power.
1.Remove the cover by gently pushing in an upward direction.
2.Attach the medication cup to the back of the unit. Push the medication cup vertically until a click is heard.
3. The mesh cap is attached as follows:
A. Place the cap position indicator onto the unit turning counterclockwise to 10 o’clock
B. Then turn the cap clockwise to 12 o’clock until a click is heard to assure proper attachment.
4. Attached the mask or mouthpiece directly over the mesh cap unit a click is heard. Remember to handle the mesh cap with care to prevent breakage.
5. Attach the AC adapter plug to the "AC Adapter Jack"
for use with electrical current.The unit can also be battery powered by using 4 "AA" batteries as described on page 13.
How to Fill Medication Cup
Be sure that all parts are clean before filling medication cup. Place the prescribed medication directly into the medication cup. Never use more than 5 ml of solution.
7