1. Before Operating | Make sure all parts are mounted properly. |
| Check to fill the medication up to correct |
| level of 5 ml. |
2. Plug In | Connect the adapter into a standard AC 120V |
| outlet. Four (4) "AA" alkaline batteries may |
| also be used to run the unit. |
3. Nebulizing | Start the unit by pressing the ON/OFF button. |
| Continuous aerosol is controlled by holding the |
| button down for four (4) seconds. Press the |
| ON/OFF button again to turn off the unit. |
| NOTES: |
| A. The green operation light will be on during |
| continuous operation. |
| B. A blinking green light during battery power |
| means that the batteries are low and need to |
| be replaced as soon as possible. |
4. Nebulization Rate | The unit has been |
| age rate of 0.25 ml per minute. Nebulization |
| rates may vary due to different medications. |
| Check with your healthcare provider or |
| pharmacist regarding your medication. |
8