Cisco Systems 3750E manual Assigning Stack Member Information, Assigning a Stack Member Number

Chapter 5 Managing Switch Stacks

Configuring the Switch Stack

WARNING: Administrators must make sure that the old stack-mac does

WARNING: not appear elsewhere in this network domain. If it does,

WARNING: user traffic may be blackholed.

Switch(config)# end
Switch# show switch
Switch/Stack Mac Address : 0016.4727.a900
Mac persistency wait time: 7 mins
	H/W	Current
Switch# Role Mac Address	Priority Version	State

----------------------------------------------------------

*1 Master 0016.4727.a900 1 0 Ready

Assigning Stack Member Information

These sections describe how to assign stack member information:

•Assigning a Stack Member Number, page 5-22(optional)

•Setting the Stack Member Priority Value, page 5-22(optional)

•Provisioning a New Member for a Switch Stack, page 5-23(optional)

Assigning a Stack Member Number

Note This task is available only from the stack master.

Beginning in privileged EXEC mode, follow these steps to assign a member number to a stack member. This procedure is optional.

	Command	Purpose
Step 1
	configure terminal	Enter global configuration mode.
Step 2
	switch current-stack-member-number	Specify the current stack member number and the new stack member
	renumber new-stack-member-number	number for the stack member. The range is 1 to 9.
		You can display the current stack member number by using the show
		switch user EXEC command.
Step 3
	end	Return to privileged EXEC mode.
Step 4
	reload slot stack-member-number	Reset the stack member.
Step 5
	show switch	Verify the stack member number.
Step 6
	copy running-config startup-config	Save your entries in the configuration file.

Setting the Stack Member Priority Value

Note This task is available only from the stack master.

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

5-22 OL-9775-02