Cisco Systems 3750E manual Displaying Obfl Information, Show logging onboard module, 45-28

Chapter 45 Troubleshooting

Using On-Board Failure Logging

Displaying OBFL Information

To display the OBFL information, use one or more of the privileged EXEC commands in Table 45-3:

Table 45-3 Commands for Displaying OBFL Information

Command	Purpose
show logging onboard [module	Displays the OBFL CLI commands that were entered on a standalone
[switch-number]]clilog	switch or the specified stack members.
show logging onboard [module	Display the UDI information for a standalone switch or the specified
[switch-number]]environment	stack members and for all the connected FRU devices: the PID, the VID,
	and the serial number.
show logging onboard [module	Display the hardware-related messages generated by a standalone switch
[switch-number]]message	or the specified stack members.
show logging onboard [module	Display the power consumption of PoE ports on a standalone switch or
[switch-number]]poe	the specified stack members.
show logging onboard [module	Display the temperature of a standalone switch or the specified switch
[switch-number]]temperature	stack members.
show logging onboard [module	Display the time when a standalone switch or the specified stack members
[switch-number]]uptime	start, the reason the standalone switch or specified stack members restart,
	and the length of time that the standalone switch or specified stack
	members have been running since they last restarted.
show logging onboard [module	Display the system voltages of a standalone switch or the specified stack
[switch-number]]voltage	members.

For more information about using the commands in Table 45-3and for examples of OBFL data, see the command reference for this release.

	Catalyst 3750-E and 3560-E Switch Software Configuration Guide
45-28	OL-9775-02