Cisco Systems 3750E manual Configuring Igmp Snooping and MVR, 24-1

C H A P T E R 24

Configuring IGMP Snooping and MVR

Note

Note

Note

This chapter describes how to configure Internet Group Management Protocol (IGMP) snooping on the Catalyst 3750-E or 3560-E switch, including an application of local IGMP snooping, Multicast VLAN Registration (MVR). It also includes procedures for controlling multicast group membership by using IGMP filtering and procedures for configuring the IGMP throttling action. Unless otherwise noted, the term switch refers to a Catalyst 3750-E or 3560-E standalone switch and to a Catalyst 3750-E switch stack.

For IP Version 6 (IPv6) traffic, Multicast Listener Discovery (MLD) snooping performs the same function as IGMP snooping for IPv4 traffic. For information about MLD snooping, see Chapter 25, “Configuring IPv6 MLD Snooping.”

For complete syntax and usage information for the commands used in this chapter, see the switch command reference for this release and the “IP Multicast Routing Commands” section in the Cisco IOS IP Command Reference, Volume 3 of 3:Multicast, Release 12.2.

This chapter consists of these sections:

•Understanding IGMP Snooping, page 24-2

•Configuring IGMP Snooping, page 24-7

•Displaying IGMP Snooping Information, page 24-17

•Understanding Multicast VLAN Registration, page 24-18

•Configuring MVR, page 24-20

•Displaying MVR Information, page 24-24

•Configuring IGMP Filtering and Throttling, page 24-24

•Displaying IGMP Filtering and Throttling Configuration, page 24-29

You can either manage IP multicast group addresses through features such as IGMP snooping and MVR, or you can use static IP addresses.

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

OL-9775-02 24-1