Kyocera Fs-2020d manual Installing Utilities, Upgrading Driver Components, Express Installation

Installation

Installing in Express Mode on page 1-2

Custom Installation

Installing in Custom Mode with a USB Connection on page 1-4

Installing in Custom Mode with a Network Connection on page 1-5

Installing in Custom Mode with a Parallel Connection on page 1-6

Note: KPrint installs a client port monitor that lets Windows TCP/IP print from any network card connected to a printing system. KPrint supports LPR and IPP printing. For the KPrint Installation instructions, refer to your Product Library CD. KPrint uses a stand-alone installer.

Installing Utilities

On the Installation Method screen, click Utilities to install printer utilities. You can also select utilities to install during the Custom Installation procedure.

Upgrading Driver Components

1

2

3

If the installation wizard detects older driver or utility components, the Software Component Upgrade page appears.

Choose the component to upgrade. Click Next.

Confirm your upgrade settings. To start the upgrade, click Upgrade.

When the upgrade completes, click Next. The Installation Method page appears.

Express Installation

Express Mode applies to driver installation for a USB or network connection only. The installation wizard discovers printers that are turned on, and connected by USB and network cable. In Custom Mode, you are able to select the installation packages and specify the port.

Installing in Express Mode

1

2

3

This section describes the express installation procedure of the driver software in Windows operating systems.

Ensure that your printer and computer are turned on and connected by USB or network cable.

Note: If the Found New Hardware Wizard dialog box appears during the installation process, click Cancel. If the Hardware Installation warning dialog box appears, click Continue Anyway.

On the Installation Method page, click Express Mode.

The Discover Printing System page opens to search for your printer. If Discover does not find your printing system, a message appears. Remove and reinsert the USB or network cable, and ensure it is connected properly. Click

1-2 User Guide