Cabletron Systems 8H02-16 manual FE-100TX Crossover Switch

Connecting to the Network

Position =

(not crossed over)

1. TX+ 5. NC

2. TX- 6. RX-

3.RX+ 7. NC

4.NC 8. NC

= x

10

100

FE-100TX

Position X (crossed over)

1.RX+ 5. NC

2.RX- 6. TX-

3.TX+ 7. NC

4.NC 8. NC

166505

Figure 3-7 FE-100TX Crossover Switch

Connect an FE-100TX to a twisted pair segment as follows:

1.Ensure that the device at the other end of the segment is connected to the segment and is powered ON.

2.Connect the twisted pair segment to the module by inserting the RJ45 connector on the twisted pair segment into the RJ45 port on the module. See Figure 3-7.

8H02-16 User’s Guide 3-9