Paradyne 7112 manual Screen Function Keys, Switching Between Screen Work Areas, Example

Using the ASCII Terminal Interface (ATI)

Screen Function Keys

All screen function keys located below the dotted line operate the same way (upper- or lowercase) throughout the screens.

For the screen	Select . . .	And press Enter to . . .
function . . .
MainMenu	M or m	Return to the Main Menu screen.
Exit	E or e	Terminate the async terminal session.
New	N or n	Enter new data.
Del ete	L or l	Delete data.
Save	S or s	Save information.
Refresh	R or r	Update screen with current information.
ClrStats	C or c	Clear network performance statistics and refresh the
		screen, Clear status messages for one-time events.
PgUp	U or u	Display the previous page.
PgDn	D or d	Display the next page.
ResetMon	R or r	Reset an active Monitor of active pattern test counter to
		zero.

Switching Between Screen Work Areas

Selecting Ctrl-a allows you to switch between the two screen work areas to perform all screen functions.

"Procedure

To access the screen function area below the dotted line:

1.Press Ctrl-a to switch from the screen area to the screen function key area below the dotted line. The available selections for the first input field appear on the last line as shown below.

2.Select either the function's designated (underlined) character or press the tab key until you reach the desired function key.

Example:

To save the changes you have made on this screen, enter s or S ( Save).

3.Press Enter.

4.To return to the screen area above the dotted line, press Ctrl-a again.

2-6 March 1998 7112-A2-GB20-20