Paradyne 7112 manual InProgress3 ± Test is, NotSupported4 ± Requested, UnAbleToRun5 ± Test cannot

MIB Descriptions

Table C-16. Generic Interface Test Table Objects (3 of 3)

Object	Description	Setting/Contents
ifExtnsTestResult	Contains the result of the	Supports the following values:
(ifExtnsTestEntry	most recently requested	H none(1) ± No test active.
5)	test.
1.3.6.1.3.6.2.1.5		H inProgress(3) ± Test is in
		progress.
read-only
		H notSupported(4) ± Requested
		test is not supported.
		H unAbleToRun(5) ± Test cannot
		run due to the state of the unit.
ifExtnsTestCode	Contains a code providing	Supports the following values:
(ifExtnsTestEntry	more specific information	H none (wellKnownCodes 1) ± No
6)	about the test result.
		further information is available.
1.3.6.1.3.6.2.1.6		Used for send pattern/code and
read-only		loopback tests.
		H inSyncNoBitErrors
		(wellKnownCodes 2) ± A monitor
		pattern (QRSS or 511) test has
		synchronized on the pattern and
		has not detected any bit errors.
		H inSyncWithBitErrors
		(wellKnownCodes 3) ± A monitor
		pattern (QRSS or 511) test has
		synchronized on the pattern but
		has detected any bit errors.
		H notInSync (wellKnownCodes 4)
		± A monitor pattern (QRSS or 511)
		test has not synchronized on the
		requested pattern.

C-28 March 1998 7112-A2-GB20-10