Paradyne 7112 manual Initiating an ATI Session, Select

Using the ASCII Terminal Interface (ATI)

Initiating an ATI Session

Menu Path

Screen

Area

The Main Menu screen is displayed on the screen unless a login ID and password is required or the ATI is already in use.

If security is enabled, the system prompts you for a login ID and password. After you enter a valid login ID and password, the Main menu appears. If you enter an invalid login ID and password after three attempts, the Telnet session closes or the terminal connection returns to an idle state. Refer to Chapter 4, Security.

If the ATI is already in use, you will see a ªconnection refusedº or ªconnection failedº message (if you are using a Telnet session) or you will see the IP address of the other user (if you are using the Terminal port).

Entry to all of the DSU/CSU's tasks begins at the Main Menu screen.

main	PARADYNE
Device Name:	Model: 7112

MAIN MENU

Status

Test

Configuration

Control

Input Fields

Screen	±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
	Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Function
	Save
Keys

Select . . .

To . . .

Status	View system status, diagnostic test results, cross connections, statistics,
	and LEDs identity information.
Test	Select and cancel tests for the DSU/CSU's interfaces.
Configuration	Display and edit the configuration options.
Control	Control the user interface for device naming, login administration, or to
	initiate a power-up reset of the DSU/CSU.

2-2 March 1998 7112-A2-GB20-20