Paradyne 7112 manual Generic Interface Extension MIB ± RFC, Generic Interface Test Table Objects

MIB Descriptions

Generic Interface Extension MIB ± RFC 1229

The unit supports the Generic Interface Extension MIB (RFC 1229):

HTable C-16,Generic Interface Test Table Objects

The DSU/CSU only supports the Generic Interface Test Table in the Generic

Interface Extension MIB.

Generic Interface Test Table Objects

The Generic Interface Test Table Objects are used to access additional tests (loopbacks and pattern tests) that are not provided in the interface group of MIB II. Clarification for objects contained in this table as it applies to the unit is provided below.

Table C-16. Generic Interface Test Table Objects (1 of 3)

Object	Description	Setting/Contents
ifExtnsTestType	A control variable used to	The following objects use identifiers
(ifExtnsTestEntry	start and stop user-initiated	to control tests on the network T1
4)	tests on the interface. The	and User Data port interface:
1.3.6.1.3.6.2.1.4	following tests may be	H notest(0 0) ± Stops the test in
	controlled:
read-write		progress on the network T1 or
	H Monitor QRSS test	User Data port interface.
	pattern on the network	H testMon QRSS (wellKnownTests
	T1 interface.
		3) ± Starts a Monitor QRSS test
	H Send QRSS/511 test	on the interface.
	pattern on the User Data
	port.
	H Send V.54/FT1 up/down
	code to the remote unit
	for the User Data port.
	H Monitor QRSS/511 test
	pattern on the User Data
	port.
	H Data Channel and Data
	Terminal Loopbacks on
	the User Data port.	Continued on next page.

C-26 March 1998 7112-A2-GB20-10