Paradyne 7112 Standards Compliance for Snmp Traps, Trap warmStart, Trap authentificationFailure

Standards Compliance for

SNMP Traps

D

Overview

This section describes the unit's compliance with SNMP standards and any special operational features for the SNMP traps supported. The unit supports the following user interface traps and enterprise-specific traps:

Trap: warmStart

SNMP Trap	Description	Possible Cause
warmStart	The unit has reinitialized	H Reset command.
	itself.	H Power disruption.
	The trap is sent after the
	unit resets and stabilizes.
	There are no
	variable-bindings.

Trap: authentificationFailure

Along with the authenticationFailure MIB, a string is returned that identifies the IP address of the workstation that attempted to access the unit.

NOTE:

To display the address of the workstation that attempted to access the unit, you must customize your SNMP trap by adding $1 after authentication failure.

7112-A2-GB20-20 March 1998 D-1