Paradyne 7112 manual Output Signal Table Objects, Rs232OutSigEntry

MIB Descriptions

Output Signal Table Objects

The Output Signal Table Objects contains entries for the output signals that can be asserted by the unit, for the synchronous User Data port. Clarification for objects contained in this table as it applies to the unit is provided below.

Table C-15. Output Signal Table Objects

Object, OID, Access	Description	Setting/Contents
rs232OutSigName	Contains the identification	Supports only the following
(rs232OutSigEntry 2)	of a hardware output signal.	values:
1.3.6.1.2.1.10.33.6.1.2		cts(2) ± Clear To Sen
read-only		DS1r(3) ± Data Set Ready
rs232OutSigState	Contains the current signal	Supports only the following
(rs232OutSigEntry 3)	state.	values:
1.3.6.1.2.1.10.33.6.1.3		on(2) ± The signal is asserted.
read-only		off(3) ± The signal is
		deasserted.
rs232OutSigChanges	Indicates the number of	Increments the object each
(rs232OutSigEntry 4)	times that a signal has	time that the signal is sampled
1.3.6.1.2.1.10.33.6.1.4	changed from on to off, or	(every 100 ms) and the signal
	off to on.	state is different from the
read-only
		previous state.

7112-A2-GB20-20 March 1998 C-25