IP Addressing | Paradyne 7112 specification

IP Addressing

5

IP Addressing

There are three IP addressing strategies to provide SNMP NMS connectivity.

HLocal addressing only

HExtending subnet for FDL

HUnique subnet for the FDL

Review the following information before selecting an IP addressing scheme.

HAssign an IP address for the 10BaseT port and FDL management interfaces.

HSet the default gateway address. This is a default route for all destinations not on the LAN. The gateway should be a router on the LAN with routes to the rest of the network

HEach DSU/CSU routing table supports a maximum of 20 routes.

ÐA subnet route is automatically added for the 10BaseT port

ÐA Host route is automatically added for the FDL link using RIP

HAny legal host address is allowed for a given subnet.

7112-A2-GB20-20

March 1998

5-1

Image 37

Paradyne 7112 manual IP Addressing

Contents

Model 7112 T1 DSU/CSU Copyright 1998 Paradyne Corporation All rights reserved Contents Configuring the DSU/CSU Monitoring the DSU/CSU Messages and Troubleshooting MIB Descriptions Technical Specifications Glossary Index Document Purpose and Intended Audience About This GuideDocument Summary Product-Related Documents About the T1 DSU/CSU Model 7112 T1 DSU/CSU Features Typical Configuration through a T1 network Typical DSU/CSU Configurations User Interface Types Front Panel LED Status Indicators Snmp Management Capabilities Rear Panel Interface ConnectionsManagement Information Base MIB Support Network Accessing the ATI Using the Ascii Terminal Interface ATIConnecting to the Terminal Port Select Initiating an ATI Session Screen Format Types Screen Work AreasWhat Affects Screen Displays Use the screen format Navigating Status Test Configuration ControlKeyboard Keys Press Procedure Screen Function Keys Switching Between Screen Work AreasFor the screen Select Press Enter to Function Example Ending an ATI Session Using the Ascii Terminal Interface ATI Entering Device and System Information Configuring the DSU/CSUMain Menu → Control → Device Configuration Option Areas Configuring the DSU/CSUConfiguration Option Area Configuration Option Set Saving Configuration Options Accessing and Displaying Configuration OptionsMain Menu → Configuration Load Configuration From If you select Then Cross Connect Assignments Assigning DS0 Channels to the Data Port Displaying DS0 Channel Assignments Using the Block or Acami Assignment Method Clearing DS0 Channel Assignments Using the Individual Channel Assignment Method Overview Security Main Menu → Control → Administer Logins Creating a LoginOn the Administer Enter Logins screen, for Resetting the DSU/CSUs COM Port or Factory Defaults Deleting a Login If entering yes to prompt Then ATI Access Effective Access Levels ATI Access to Menu Functions Effective Access Level Assigning Snmp Community Names and Access Levels Controlling Snmp AccessConnection Failed Limiting Snmp Access through the IP Addresses Security IP Addressing IP Addressing Local Addressing Only No FDL IP Addressing ExamplesSubnet NMS a NMS B FDL Connection ± Extending Subnet for FDL LAN a FDL Connection ± Unique FDL Subnet Assigning IP Addresses and Subnet Masks If using Then assign IP Addressing What to Monitor Monitoring the DSU/CSU Main Menu → Status → Display LEDs DSU/CSU LEDs Fail System LEDs Alarm SIG ± Network SignalEER ± Excessive Error Rate Network LEDs Port LEDs System and Test Status Status Screen CommandsMain Menu → Status → System and Test Status Yyyyyyyy Health and Status Messages Xxxxxxxx Self-Test Results Test Status Messages Meaning Test Status Messages Main Menu → Status → Cross Connect Status Cross Connect StatusNetwork Time Slot Fields top Indicate Main Menu → Status → Network Performance Statistics Network Performance Statistics Interval Table Summary Information Worst Interval Hour Totals Ethernet Port StatusMain Menu → Status → Ethernet Port Status Main Menu → Status → Management Protocol Statistics Management Protocol Statistics March Detecting Problems TestingStatus Specific Trap Screen Main Menu → Test Accessing the Test Menu Main Menu → Test → Network Tests Running Network Tests Payload Loopback Line Loopback Repeater Loopback Test Patterns for the Network Remote Send Line Loopback Main Menu → Test → Data Port Tests Running Data Port Tests CSU DSU Data Terminal Loopback Data Channel Loopback Send V.54 Up/Down Sequences Test Patterns for the DTE Send FT1 Up/Down Sequences Ending an Active Test Lamp Test Configuring Snmp Traps Messages and TroubleshootingSnmp Traps Device Messages 1 What Message Indicates What To Do Device Messages Device Messages 2 What Message Indicates What To Do Troubleshooting 1 Symptom Possible Cause Solutions Troubleshooting Troubleshooting 2 Symptom Possible Cause Solutions Messages and Troubleshooting Select To Access To Configure Configuration Option Tables System Options Menu Test TimeoutTable A-1. System Options Self Test Table A-2. Network Interface Options 1 Network Interface Options MenuLine Framing Format Line Coding Format Line Build Out LBO Possible Settings 0.0, ±7.5, ±15, ±22.5 Bit Stuffing Possible Settings 62411, Part68, DisableTable A-2. Network Interface Options 2 FDL Management Link Network Initiated Line Loopback LLB Table A-2. Network Interface Options 3Network Initiated Payload Loopback PLB Ansi Performance Report Messages Table A-2. Network Interface Options 4Circuit Identifier Cross Connect Assignments Assign By Available Settings Block, ACAMI, ChannelTable A-3. Cross Connect Assignments Synchronous Data Port Assignments Table A-4. Data Port Options 1 Data Port Options MenuPort Base Rate Invert Transmit Clock Table A-4. Data Port Options 2 Action on Network Yellow AlarmInvert Transmit and Received Data Table A-4. Data Port Options 3 Ethernet Port Options Menu Port Use Possible Settings 802.3, Version 2, DisableTable A-5. Ethernet Port Options 1 Table A-5. Ethernet Port Options 2 Terminal Port OptionsTable A-6. Terminal Port Options 1 Character Length Port Access Level Possible Settings Level 1, Level 2, Level Login RequiredTable A-6. Terminal Port Options 2 Stop Bits Table A-6. Terminal Port Options 3 Telnet Session OptionsTable A-7. Telnet Session Options 1 Table A-7. Telnet Session Options 2 General Snmp Management Options Snmp MenuTable A-8. General Snmp Management Options 1 Snmp NMS Security Options Name 2 AccessTable A-8. General Snmp Management Options 2 Table A-9. Snmp NMS Security Options 1 Table A-9. Snmp NMS Security Options 2 Access Level Table A-10. Snmp Traps Options 1 Snmp Traps OptionsSnmp Traps Number of Trap Managers Table A-10. Snmp Traps Options 2 Link Traps Possible Settings Disable, Up, Down, BothEnterprise Specific Traps Link Trap Interfaces Configuration Option Settings default in Bold Configuration WorksheetsEnable, Disable Worksheets ESF, D4 Disable, EnableBlank Internal, External Nx64, Nx56 Ethernet Port Configuration Option Settings Snmp NMS Security Snmp Worksheets MIB II ± RFC 1213 and RFC MIB Descriptions SysDescr system System GroupSysName system Physical 1 ± Layer Interfaces GroupDatalink/subnetwork Internet 4 ± Layer EthernetCsmacd6 ± Used for Version Hardware Revision º Up1 IfInErrors ifEntry Testing3 stateIfInOctets ifEntry IfName ifXEntry Extension to Interface Table ifXTableIfXEntry IfStackEntry1 Interface Stack GroupIfStackEntry2 Generic Receive Address Table Interface Test TableIP Group Exist. The following objects must InvalidBe specified On next TCP Group Icmp GroupUDP Group Do not specify the following Transmission Group Snmp GroupTable C-6. Transmission Group Objects Description Transmission Dsx1ConfigEntry DS1 Near End Group Configuration Table ObjectsDS1/E1 ± RFC Dsx1ESF2 ± Indicates Dsx1B8ZS2 ± Indicates Dsx1SendResetCode4 ±Dsx1AMI5 ± Indicates Dsx1SendNoCode1 ± Dsx1LossOfSignal64 ± Dsx1NoAlarm1 ± NoDsx1NoLoop1 ± The T1 Dsx1PayloadLoop2 ± LocalTiming2 ± LoopTiming1 ±ThroughTiming3 ± Dsx1other1 ± Snmp Dsx1CurrentEntry DS1 Near End Group Current Table Objects Dsx1IntervalEntry DS1 Near End Group Interval Table ObjectsDsx1IntervalEntry10 Dsx1TotalEntry DS1 Near End Group Total Table Objects RS-232-Like MIB ± RFC Ethernet-Like MIB ± RFCDS1 Fractional Group Number of RS-232-Like Ports Object Rs232PortEntry Asynchronous Port Table Objects Disabled2 ± Does notRs232AsyncPortEntry Rs232SyncPortEntry Synchronous Port Table Objects Rs232InSigEntry Input Signal Table Objects Rs232OutSigEntry Output Signal Table Objects Generic Interface Test Table Objects Generic Interface Extension MIB ± RFCIfExtnsTestEntry TestMon Qrss wellKnownTests ± Starts a Monitor 511 test on the interface InSyncWithBitErrors InSyncNoBitErrorsInProgress3 ± Test is NotSupported4 ± Requested Enterprise MIB Object Device Configuration Variable pdn-commonDevice Security, pdn-security pdn-common Device Traps, pdn-traps pdn-common MIB Descriptions Trap warmStart Standards Compliance for Snmp TrapsTrap authentificationFailure Snmp Trap Description Possible Cause Traps linkUp and linkDown Interface LinkUp/Down Variable-Bindings Possible Cause Trap What It Indicates Possible Cause Traps enterpriseSpecificPage Standards Compliance for Snmp Traps Cabling Overview Cables and Pin Assignments Modular RJ48C-to-CA81A T1 Network Interface Cable Modular RJ48C-to-RJ48C T1 Network Interface Cable 10BaseT Connector Terminal Port EIA-232 ConnectorSignal Direction Pin # Use Pin # Pin Serial Crossover Cable Signal DTE V.35 ConnectorDirection Pin Socket Connector Cables and Pin Assignments Model 7112 DSU/CSU Technical Specifications 1 Technical Specifications Model 7112 DSU/CSU Technical Specifications 2 Glossary Default Configuration optionDigital signal Channel allocation EIA-232 Factory defaultsEnterprise MIB Enterprise-specific Loopback ResetManager Snmp Multiplexing Self-test RS-232Subnet Subnet address In-8 pattern Yellow AlarmPattern Numbers Index IN-2 IN-3 IN-4