MIB Descriptions

DS1 Fractional Group

The DS1 Fractional Group consists of the DS1 fractional table. This table (dsx1FracTable) is fully supported by the DSU/CSU and allows DS0 (time slots) to be mapped between the network interface and the data port. The DSU/CSU validates all channel configurations before applying them.

Ethernet-Like MIB ± RFC 1643

The unit supports the Ethernet-Like MIB, RFC 1643 for all objects except :

Hdot3Tests

Hdot3ChipSets

Hdot3Errors

RS-232-Like MIB ± RFC 1659

The unit supports RS-232-Like MIB, RFC 1659:

HNumber of RS-232-Like Ports Object.

HGeneral Port Table Objects, Table C-11.

HAsynchronous Port Table Objects, Table C-12. Not supported for the User Data port.

HSynchronous Port Table Objects, Table C-13. Not supported for the Terminal port.

HInput Signal Table Objects, Table C-14. Not supported for the Terminal port.

HOutput Signal Table Objects, Table C-15. Not supported for the Terminal port.

Supported for the User Data port and the Terminal port. RFC 1659 is an SNMPv2 MIB, but is converted to an SNMPv1 MIB to support this unit. This MIB consists of one object and five tables.

Number of RS-232-Like Ports Object

Supported as documented in the RFC.

General Port Table Objects

The General Port Table Objects contains configuration options for the RS-232-Like interfaces. Clarification for objects contained in this table as it applies to the unit is provided below.

C-20

March 1998

7112-A2-GB20-10

Page 122
Image 122
Paradyne 7112 Ethernet-Like MIB ± RFC, RS-232-Like MIB ± RFC, DS1 Fractional Group, Number of RS-232-Like Ports Object