Paradyne 7112 manual Icmp Group, TCP Group, UDP Group, Do not specify the following

MIB Descriptions

Table C-5. IP Group Objects (3 of 3)

Object, OID, Access	Description	Setting/Contents
ipRouteTable (ip21)		Objects that are not used by this
(Continued)		unit:
		H ipRouteMetric2,
		ipRouteMetric3,
		ipRoutemetric4,
		ipRoutemetric5 ±
		Default to ±1.
		H ipRouteNextHop ±
		Defaults to 0.0.0.0.
		Do not specify the following
		read-only objects in the Set PDU
		used to add a route:
		H ipRouteProto ± Set to
		netmgmt(3) by the software.
		H ipRouteAge ± Reflects the
		value of the time-to-live for the
		route (in seconds). Defaults to
		999 (permanent route).
		H ipRouteInfo ± Unused; set to
		{0, 0}.

ICMP Group

The ICMP (Internet Control Management Protocol) Group objects are fully supported.

TCP Group

The TCP Group objects are fully supported, with the exception of tcpConnState object, which will be read-only, since deleteTCB (12) is not supported and is the only value which can be set.

UDP Group

The UDP Group objects are fully supported.

7112-A2-GB20-20 March 1998 C-11