Paradyne 7112 manual Enterprise MIB Object, Device Configuration Variable pdn-common

MIB Descriptions

Enterprise MIB Object

The following Paradyne Enterprise MIB Object is supported by the unit:

HDevice Configuration Variable, Table C-17

Device Configuration Variable (pdn-common 7)

The variable devConfigAreaCopy in the devConfigArea group is supported. This variable allows the entire contents of one configuration area to be copied into another configuration area. The unit only supports the following values.

Table C-17. Device Configuration Variable

Object, OID, Access	Description	Setting/Contents
devConfigAreaCopy	A ªgetº of this object will	noOp(1)
1.3.6.1.4.1.1795.2.24.2.7.1.1	always return noOp.
	Copy from active area to	active-to-customer1(2)
read-write
	customer 1 area.
	Copy from active area to	active-to-customer2(3)
	customer 2 area.
	Copy from customer 1 area	customer1-to-active(4)
	to active area.
	Copy from customer 1 area	customer1-to-
	to customer 2 area.	customer2(5)
	Copy from customer 2 area	customer2-to-active(6)
	to active area.
	Copy from customer 2 area	customer2-to-
	to customer 1 area.	customer1(7)
	Copy from factory area to	factory1-to-active(8)
	active area. There is only one
	factory area for the unit.
	Copy from factory area to	factory1-to-
	customer 1 area.	customer1(9)
	Copy from factory area to	factory1-to-
	customer 2 area.	customer2(10)

Device Security, pdn-security (pdn-common 8)

Use the Device Security table to control the number of SNMP managers that may access the unit, as well as the unit access level (read or read/write). Fully supported by the unit.

Device Traps, pdn-traps (pdn-common 9)

Controls the SNMP managers to which the unit reports traps. Fully supported by the unit.

Device Control, pdn-control (pdn-common 10)

Uses the devControlReset object to reset the unit. Fully supported by the unit.

7112-A2-GB20-20 March 1998 C-29