Paradyne 7112 manual Assigning DS0 Channels to the Data Port, Cross Connect Assignments

Configuring the DSU/CSU

Assigning DS0 Channels to the Data Port

The DSU/CSU provides Cross Connect configuration options that allow you to do the following:

HDisplay network DS0 channels assigned to the data port.

HAllocate network DS0 channels to the data port.

HClear (unassign) all DS0 channels from the data port interface.

The DSU/CSU's default configuration has all DS0 channels assigned to the data port.

To access the Cross Connect Assignments screen, follow this menu selection sequence:

Main Menu → Configuration → Load Configuration From →

Cross Connect

main/config/cross_connect								PARADYNE
Device Name:							Model: 7112
			CROSS CONNECT ASSIGNMENTS
		Assign To:		Network	Port Rate (Kbps): 1536
		Assign By:		Block
		DS0s to Allocate:		24
	N01	N02	N03	N04	N05	N06	N07	N08
	P(B)	P(B)	P(B)	P(B)	P(B)	P(B)	P(B)	P(B)
	N11	N12	N13	N14	N15	N16	N17	N18
P(B)		P(B)	P(B)	P(B)	P(B)	P(B)	P(B)	P()
	N19	N20	N21	N22	N23	N24	N25	N26
P(B)		P(B)	P(B)	P(B)	P(B)	P(B)	P(B)	P(B)

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl±a to access these functions, ESC for previous menu	MainMenu Exit
Save Clrassign
Select: Block, ACAMI, Channel.

3-4 March 1998 7112-A2-GB20-20