Paradyne 7112 manual Interface Test Table, Generic Receive Address Table, IP Group

MIB Descriptions

Table C-4. Interface Stack Group Objects (2 of 2)

Object, OID, Access	Description	Setting/Contents
ifStackStatus	Specifies the stack group's	H When ifStackStatus set to
(ifStackEntry3)	status compared to the	active ± maps to ifOperStatus
1.3.6.1.2.1.31.1.2.1.3	interface's ifOperStatus.	set to up(1) or testing(3).
		H When ifStackStatus set to not
read-only
		in service ± maps to
		ifOperStatus set to down(2).

Interface Test Table

Not supported by the unit.

Generic Receive Address Table

Not supported by the unit.

IP Group

The Internet Protocol Group objects are supported by the unit for all data paths that are currently configured to carry IP data to/from the unit. All of the objects in the IP Group, except for the IP Address Translation table, are fully supported. The following table provides clarification for objects contained in the IP group when it is not clear how the object definition in MIB II is supported by the unit.

Table C-5. IP Group Objects (1 of 3)

Object, OID, Access	Description	Setting/Contents
ipForwarding (ip1)	Specifies whether the unit	Supports only the following
1.3.6.1.2.1.4.1	is acting as an IP gateway	value:
	for forwarding of datagram	H forwarding(1) ± The unit is
read-write
	received by, but not
		acting as a gateway.
	addressed to, the unit.
ipAddrTable (ip20)	The address table.	Supported.
1.3.6.1.2.1.4.20
read-only
ipAdEntAddr	An IP address supported by	Indexes for tables must be
(ipAddrEntry 1)	the unit which serves as an	unique. Therefore, only one
1.3.6.1.2.1.4.20.1.1	index to the address table.	ifIndex can be displayed for each
		IP address supported by the
read-only
		device. If the same IP address is
		configured for multiple interfaces,
		or for default IP addresses, the
		ipAddrTable will not display all of
		the interfaces that support a
		particular IP address.

7112-A2-GB20-20 March 1998 C-9