Security
4-2 7112-A2-GB20-20
March 1998
Creating a Login
Logins apply to Terminal port and Telnet access to the ATI. Six login ID/password
combinations are available. Each Login ID and Password must be unique and
include an access level.
For additional information regarding the ATI access using the Login Required
option, refer to

ATI Access

on page 4-4

.

Procedure
To create a login record:
1. Follow this menu selection sequence:
Main Menu
Control

Administer Logins

2. Press Ctrl-a to switch to the screen function key area below the dotted line.
3. Select New and press Enter.
4. Create the login by entering the following fields. Login IDs and passwords are
case-sensitive.
On the Administer
Logins screen, for the . . . Enter . . .
Login ID 1 to 10 ASCII printable characters
Password 1 to 10 ASCII printable characters
Access Level Level 1, Level 2, or Level 3
NOTE:
Assign at least one Level 1 Access Level. Full access is necessary to
make configuration option changes and administer logins.
5. Press Ctrl-a to switch to the screen function key area below the dotted line.
Select Save and press Enter.
6. When Save is complete, Command Complete appears at the bottom of the
screen. Select:
—N
ew to add another login record
—M
ainMenu to go to the Main Menu
—E
xit to end the ATI session