Snmp Group, Transmission Group, Ds1 transmission | Paradyne 7112

MIB Descriptions

Transmission Group

Objects in the Transmission Group are supported on the T1 network interface,

User Data port and Terminal port. These objects are defined through other

Internet-standard MIB definitions rather than within MIB II.

Table C-6. Transmission Group Objects

Object	Description

dot3	Supported on the Ethernet port. Defined by the Ethernet-like
(transmission 7)	MIB (RFC 1643).

rs232	Supported on the User Data port and Terminal port. Defined by
(transmission 33)	the RS-232-like MIB (RFC 1659).

ds1 (transmission 18)	Supported on the DS1 network interface by Paradyne
	Enterprise MIB.

SNMP Group

The SNMP Group objects that apply to a management agent are fully supported. The following objects apply only to an NMS and return a zero value if accessed.

HsnmpInTooBig (snmp 8)

HsnmpInNoSuchNames (snmp 9)

HsnmpInBadValues (snmp 10)

HsnmpInReadOnlys (snmp 11)

HsnmpInGenErrs (snmp 12)

HsnmpInGetResponses (snmp 18)

HsnmpInTraps (snmp 19)

HsnmpOutGetRequests (snmp 25)

HsnmpOutGetNexts (snmp 26)

HsnmpOutSetRequests (snmp 27)

C-12

March 1998

7112-A2-GB20-10

Image 114

Paradyne 7112 manual Snmp Group, Table C-6. Transmission Group Objects Description, Ds1 transmission

Contents

Model 7112 T1 DSU/CSU Copyright 1998 Paradyne Corporation All rights reserved Contents Configuring the DSU/CSU Monitoring the DSU/CSU Messages and Troubleshooting MIB Descriptions Technical Specifications Glossary Index About This Guide Document Purpose and Intended AudienceDocument Summary Product-Related Documents Model 7112 T1 DSU/CSU Features About the T1 DSU/CSU Typical DSU/CSU Configurations Typical Configuration through a T1 network Front Panel LED Status Indicators User Interface Types Management Information Base MIB Support Rear Panel Interface ConnectionsSnmp Management Capabilities Network Using the Ascii Terminal Interface ATI Accessing the ATIConnecting to the Terminal Port Initiating an ATI Session Select What Affects Screen Displays Screen Work AreasScreen Format Types Use the screen format Keyboard Keys Status Test Configuration ControlNavigating Press Procedure For the screen Select Press Enter to Function Switching Between Screen Work AreasScreen Function Keys Example Ending an ATI Session Using the Ascii Terminal Interface ATI Configuring the DSU/CSU Entering Device and System InformationMain Menu → Control → Device Configuring the DSU/CSU Configuration Option AreasConfiguration Option Area Configuration Option Set Main Menu → Configuration Load Configuration From Accessing and Displaying Configuration OptionsSaving Configuration Options If you select Then Assigning DS0 Channels to the Data Port Cross Connect Assignments Using the Block or Acami Assignment Method Displaying DS0 Channel Assignments Using the Individual Channel Assignment Method Clearing DS0 Channel Assignments Security Overview Creating a Login Main Menu → Control → Administer LoginsOn the Administer Enter Logins screen, for Deleting a Login Resetting the DSU/CSUs COM Port or Factory Defaults ATI Access If entering yes to prompt Then Effective Access Level Effective Access Levels ATI Access to Menu Functions Controlling Snmp Access Assigning Snmp Community Names and Access LevelsConnection Failed Limiting Snmp Access through the IP Addresses Security IP Addressing IP Addressing IP Addressing Examples Local Addressing Only No FDLSubnet FDL Connection ± Extending Subnet for FDL NMS a NMS B FDL Connection ± Unique FDL Subnet LAN a If using Then assign Assigning IP Addresses and Subnet Masks IP Addressing Monitoring the DSU/CSU What to Monitor DSU/CSU LEDs Main Menu → Status → Display LEDs System LEDs Fail EER ± Excessive Error Rate SIG ± Network SignalAlarm Network LEDs Port LEDs Status Screen Commands System and Test StatusMain Menu → Status → System and Test Status Health and Status Messages Yyyyyyyy Self-Test Results Xxxxxxxx Test Status Messages Test Status Messages Meaning Cross Connect Status Main Menu → Status → Cross Connect StatusNetwork Time Slot Fields top Indicate Network Performance Statistics Main Menu → Status → Network Performance Statistics Summary Information Interval Table Worst Interval Ethernet Port Status Hour TotalsMain Menu → Status → Ethernet Port Status Management Protocol Statistics Main Menu → Status → Management Protocol Statistics March Testing Detecting ProblemsStatus Specific Trap Screen Accessing the Test Menu Main Menu → Test Running Network Tests Main Menu → Test → Network Tests Line Loopback Payload Loopback Repeater Loopback Remote Send Line Loopback Test Patterns for the Network Running Data Port Tests Main Menu → Test → Data Port Tests Data Terminal Loopback CSU DSU Data Channel Loopback Send V.54 Up/Down Sequences Send FT1 Up/Down Sequences Test Patterns for the DTE Lamp Test Ending an Active Test Messages and Troubleshooting Configuring Snmp TrapsSnmp Traps Device Messages Device Messages 1 What Message Indicates What To Do Device Messages 2 What Message Indicates What To Do Troubleshooting Troubleshooting 1 Symptom Possible Cause Solutions Troubleshooting 2 Symptom Possible Cause Solutions Messages and Troubleshooting Configuration Option Tables Select To Access To Configure Table A-1. System Options Test TimeoutSystem Options Menu Self Test Line Framing Format Network Interface Options MenuTable A-2. Network Interface Options 1 Line Coding Format Table A-2. Network Interface Options 2 Bit Stuffing Possible Settings 62411, Part68, DisableLine Build Out LBO Possible Settings 0.0, ±7.5, ±15, ±22.5 FDL Management Link Table A-2. Network Interface Options 3 Network Initiated Line Loopback LLBNetwork Initiated Payload Loopback PLB Table A-2. Network Interface Options 4 Ansi Performance Report MessagesCircuit Identifier Table A-3. Cross Connect Assignments Assign By Available Settings Block, ACAMI, ChannelCross Connect Assignments Synchronous Data Port Assignments Port Base Rate Data Port Options MenuTable A-4. Data Port Options 1 Invert Transmit Clock Action on Network Yellow Alarm Table A-4. Data Port Options 2Invert Transmit and Received Data Table A-4. Data Port Options 3 Port Use Possible Settings 802.3, Version 2, Disable Ethernet Port Options MenuTable A-5. Ethernet Port Options 1 Table A-6. Terminal Port Options 1 Terminal Port OptionsTable A-5. Ethernet Port Options 2 Character Length Table A-6. Terminal Port Options 2 Login RequiredPort Access Level Possible Settings Level 1, Level 2, Level Stop Bits Telnet Session Options Table A-6. Terminal Port Options 3Table A-7. Telnet Session Options 1 Table A-7. Telnet Session Options 2 Snmp Menu General Snmp Management OptionsTable A-8. General Snmp Management Options 1 Table A-8. General Snmp Management Options 2 Name 2 AccessSnmp NMS Security Options Table A-9. Snmp NMS Security Options 1 Access Level Table A-9. Snmp NMS Security Options 2 Snmp Traps Snmp Traps OptionsTable A-10. Snmp Traps Options 1 Number of Trap Managers Enterprise Specific Traps Link Traps Possible Settings Disable, Up, Down, BothTable A-10. Snmp Traps Options 2 Link Trap Interfaces Enable, Disable Configuration WorksheetsConfiguration Option Settings default in Bold Worksheets Disable, Enable ESF, D4Blank Nx64, Nx56 Internal, External Configuration Option Settings Ethernet Port Snmp Snmp NMS Security Worksheets MIB Descriptions MIB II ± RFC 1213 and RFC System Group SysDescr systemSysName system Datalink/subnetwork Interfaces GroupPhysical 1 ± Layer Internet 4 ± Layer Version Hardware Revision º EthernetCsmacd6 ± Used for Up1 Testing3 state IfInErrors ifEntryIfInOctets ifEntry Extension to Interface Table ifXTable IfName ifXEntryIfXEntry Interface Stack Group IfStackEntry1IfStackEntry2 Interface Test Table Generic Receive Address TableIP Group Be specified InvalidExist. The following objects must On next UDP Group Icmp GroupTCP Group Do not specify the following Table C-6. Transmission Group Objects Description Snmp GroupTransmission Group Transmission DS1/E1 ± RFC DS1 Near End Group Configuration Table ObjectsDsx1ConfigEntry Dsx1ESF2 ± Indicates Dsx1AMI5 ± Indicates Dsx1SendResetCode4 ±Dsx1B8ZS2 ± Indicates Dsx1SendNoCode1 ± Dsx1NoLoop1 ± The T1 Dsx1NoAlarm1 ± NoDsx1LossOfSignal64 ± Dsx1PayloadLoop2 ± ThroughTiming3 ± LoopTiming1 ±LocalTiming2 ± Dsx1other1 ± Snmp DS1 Near End Group Current Table Objects Dsx1CurrentEntry DS1 Near End Group Interval Table Objects Dsx1IntervalEntryDsx1IntervalEntry10 DS1 Near End Group Total Table Objects Dsx1TotalEntry DS1 Fractional Group Ethernet-Like MIB ± RFCRS-232-Like MIB ± RFC Number of RS-232-Like Ports Object Rs232PortEntry Disabled2 ± Does not Asynchronous Port Table ObjectsRs232AsyncPortEntry Synchronous Port Table Objects Rs232SyncPortEntry Input Signal Table Objects Rs232InSigEntry Output Signal Table Objects Rs232OutSigEntry IfExtnsTestEntry Generic Interface Extension MIB ± RFCGeneric Interface Test Table Objects TestMon Qrss wellKnownTests ± Starts a Monitor 511 test on the interface InProgress3 ± Test is InSyncNoBitErrorsInSyncWithBitErrors NotSupported4 ± Requested Device Security, pdn-security pdn-common Device Configuration Variable pdn-commonEnterprise MIB Object Device Traps, pdn-traps pdn-common MIB Descriptions Trap authentificationFailure Standards Compliance for Snmp TrapsTrap warmStart Snmp Trap Description Possible Cause Traps linkUp and linkDown Interface LinkUp/Down Variable-Bindings Possible Cause Traps enterpriseSpecific Trap What It Indicates Possible CausePage Standards Compliance for Snmp Traps Cables and Pin Assignments Cabling Overview Modular RJ48C-to-RJ48C T1 Network Interface Cable Modular RJ48C-to-CA81A T1 Network Interface Cable Signal Direction Pin # Terminal Port EIA-232 Connector10BaseT Connector Use Pin # Serial Crossover Cable Pin DTE V.35 Connector SignalDirection Pin Socket Connector Cables and Pin Assignments Technical Specifications Model 7112 DSU/CSU Technical Specifications 1 Model 7112 DSU/CSU Technical Specifications 2 Glossary Digital signal Configuration optionDefault Channel allocation Enterprise MIB Factory defaultsEIA-232 Enterprise-specific Manager Snmp ResetLoopback Multiplexing Subnet RS-232Self-test Subnet address Yellow Alarm In-8 patternPattern Index Numbers IN-2 IN-3 IN-4