Monitoring the DSU/CSU

24-Hour Totals

The last two lines on the screen (above the dotted line) display the totals for each statistic over the last 24 hours, along with the number of valid intervals included in the total (up to 96).

Ethernet Port Status

To view the Ethernet (10BaseT) Port Status, follow this menu selection sequence:

Main Menu Status Ethernet Port Status

main/status/ethernet

PARADYNE

Device Name:

Model: 7112

ETHERNET PORT STATUS

Port Use:

Version 2

IP Address:

000.000.000.000

Subnet Mask:

000.000.000.000

Default Gateway Address:

000.000.000.000

Ethernet MAC Address:

00:00:00:00:00:00

Frames Transmitted:

0000000000

Frames Received:

0000000000

Errored Frames:

0000000000

Excessive Collisions:

0000000000

Carrier Sense Errors:

0000000000

Deferred Transmissions:

0000000000

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±

 

ESC for previous menu

MainMenu Exit

Refresh

ClrStats

 

Table 6-5 describes the fields on the Ethernet Port Status screen.

Table 6-5. Ethernet Port Status Screen Contents (1 of 2)

Label

What the Field Indicates

 

 

Port Use

The port is enabled if 802.3 or Version 2 is displayed. The

 

port is disabled if Disable is displayed.

 

 

IP Address

The IP address of the port.

 

 

Subnet Mask

The subnet mask to be used with the IP address.

 

 

Default Gateway Address

The gateway to be used for packets that do not have a

 

route.

 

 

Ethernet MAC Address

The physical address of the port.

 

 

Frames Transmitted

The number of frames transmitted.

 

 

Frames Received

The number of frames received.

 

 

6-14

March 1998

7112-A2-GB20-20

Page 56
Image 56
Paradyne 7112 manual Hour Totals, Main Menu → Status → Ethernet Port Status