Paradyne 7112 manual Synchronous Port Table Objects, Rs232SyncPortEntry

MIB Descriptions

Synchronous Port Table Objects

The Synchronous Port Table Objects contains an entry for the synchronous user data port when this port is configured for synchronous operation. For this unit, entries in the table that are counters (rs232SyncPortEntry 3±7) are used to collect statistics only and are not supported. Clarification for objects contained in this table as it applies to the unit is provided below.

Table C-13. Synchronous Port Table Objects (1 of 2)

Object, OID, Access	Description	Setting/Contents
rs232SyncPortClock-	Specifies the clock source	Supports only the following
Source	for the port.	values:
(rs232SyncPortEntry 2)		internal(1) ± The port uses an
1.3.6.1.2.1.10.33.4.1.2		internal clock.
read-write		external(2) ± The port uses an
		external clock.
rs232SyncPortRole	Specifies whether this	Supports only the following
(rs232SyncPortEntry 8)	device interface is a DTE or	value:
1.3.6.1.2.1.10.33.4.1.8	DCE.	dce(2) ± The port acts as a
read-write		DCE.
rs232SyncPortEncoding	Specifies the bit encoding	Supports only the following
(rs232SyncPortEntry 9)	technique that this port	value:
1.3.6.1.2.1.10.33.4.1.9	uses.	nrz(1) ± The port uses
read-write		non-return to zero encoding.
		nrzi(2) ± The port uses
		non-return to zero-inverted
		encoding. This corresponds to
		the inverted transmit and
		receive data relationship.
rs232SyncPortRTS-	Specifies the method used	Supports only the following
Control	to control the RTS signal.	values:
(rs232SyncPortEntry 10)		controlled(1) ± For User Data
1.3.6.1.2.1.10.33.4.1.10		port, this value is used when
read-write		the Data Port option Carrier
		Control by RTS is set to
		Switched.
		constant(2) ± For User Data
		port, this value is used when
		the Data Port option Carrier
		Control by RTS is set to
		Constant.

7112-A2-GB20-20 March 1998 C-23