MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
Login
Once you first start the program by clicking the shortcut of Remote Manager on your desktop, a Login dialog right side will prompt you to enter the user ID and password to access to the program. Note that only “root” is the acceptable user ID for the initial access. And a User Management window for permitting the
beginning into the system will be seen. To set the setting of the permission, refer to the 6.3.1 Center Management for the detailed description.
Alarm Report
The image will turn into red and be flashing once an alarm is triggered. An alarm message with the detailed alarm status will be seen after you click on it. It will help you control the situation of surveillance.
Channel Status
An area where the status of all the channels will be shown as the following description and is with a tip of channel’s, server’s, camera’s names while your cursor points the button:
Dark Gray | All Disabled |
Flashing Pale Gray Video loss | |
Azure | Normal and the image is displayed on the screen |
Dull Blue | Normal but the image had been disabled to display |
Pink Red | Recording and the image is displayed on the screen |
Dark Red | Recording but the image had been disabled to display |
If a camera is not enabled, the image from this camera will show as the image above (gray scale) on the screen.
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
If a camera is disconnected to the server or the signal from the server is disconnected to the local camera, the image will show as above on the screen. The signal will be picked up at an interval of one minute until it is received.
Display Mode
Select a display mode to arrange the presentation of the screen.
Full Screen |
| |
No matter what | channel mode you choose, you can assemble the | |
channels as you | wish by clicking Channel Status | to meet the |
amount of the mode. For example, if you choose
6.2 
Setup
107 | 108 |
