Intel MP3000 Operating the RemoteManager, Click Alarm Control to see the window for alarm status

MicroJack User’s Manual

EYES Pro/MP2016/MP3000/MP5000

6.2.8 Alarm Control

It is available to choose the server and decide to enable or disable the corresponding alarms.

1.Click Alarm Control to see the window for alarm status.

2.To enable an alarm, simply click on

in the Status column and

change the status to .

3.Click the OK button to save the setting.

6.2.9 Back to Main Menu

Back to the main menu by clicking this button.

MicroJack User’s Manual

EYES Pro/MP2016/MP3000/MP5000

6.3 Operating the RemoteManager

6.3.1 Center Management

Users can take advantage of this section to manage the connectable servers’ detailed information. The setting should be placed before you commence configuring the system at the first time.

There are two ways to connect server:

1. Connection via Modem to Modem (refer to Appendix A for the connection):

First you should connect to the server manually via modem before accessing RemoteManager. Then, it is allowed to add a new server as a dial-up server is installed by server and a dial-up networking established by client.

2. Connection via TCP/IP

Once the function “Enable Remote View server via TCP/IP” in the setting of Networking section in system configuration has been checked, you are allowed to add a new server via TCP/IP.

115 116