MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
…
Focus Camera
The number on each button represents the camera number. These
buttons show the status ( 
enabled / 
disabled) of each camera. Under all display modes, when you click any of the camera number from the focus camera buttons, that particular camera will be switched to the first camera in display.
Start / Stop Monitoring
Click 
to start/stop monitoring. If the system is recording videos from a camera, a red triangle will appear in the upper left corner of the image frame. If you set this camera image to be recorded upon detected motion, a green triangle will show up together with the red
one when you click 
to start monitoring.
While monitoring, the system simultaneously monitors the cameras and
sensors for the conditions you set in the 
Alarms section of System Configuration. Once both conditions for cameras and sensors are met, the corresponding alarm will be triggered.
Start / Stop Audio Recording
Click this button to start/stop recording audio. Here it shows the volume of the current environment. According to the settings in the
Audio section of System Configuration, once the detected volume is greater than the sensitivity, the system will start to record the sound for a
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
After the configuring in the 
Camera
Image
Information
Area
1.Chose a map to view by clicking the map button 
…
.
2.Check out Cameras, Sensors, Relays on the map
Focus on the desired event by clicking on the event button on the map.
3.Monitoring Cameras, Sensors, and Relays.
If any event is focused, the relative information will present in the information field; otherwise, you can monitor the status of the camera in the right upper window. The different colors of the icons on the map window will turn to different flashing colors accounting for as follows:
8384
