MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
Call Out:
If you have a voice modem installed, you can make the system to call out to landline/mobile phone or pager (maximum 5 sets in total) once an alarm is triggered. Follow the following instructions.
A.Check Call Out to enable this function.
B.Select a correct model for your voice modem from the drop- down menu of Voice Modem Installed.
C.Click 
to bring up the dialog box below to set up the telephone information. Here you should follow the steps described below to set the landline/mobile phone or the pager number.
a.Select Pager or Phone.
b.Key in the numbers for the landline/mobile phone or the pager, whichever you selected in step a. If you’re setting up a pager info., you can compose a text message you wish to send to a pager by using numbers, *, and # in the Message field. If you’re
setting up a phone info., you can browse for a .WAV
file by clicking 
or create a new .WAV file by
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
clicking 
. After you complete the pager
or phone information, click 
to add this number to the table.
c.Select Dial next line if busy or Dial All. In the former case, the system will dial the next number when the current one is busy. But if the call enters the voice mail of the mobile phone or gets picked up by an answering machine, the system will act as if the
d.The 
/ 
buttons allow you to update/delete a pager or a landline/mobile phone number. To update, you need to first select the target
number, key in the updated information, and then
click 
. To delete, simply select the target
number and click 
.
Email:
You can email alarm messages once an alarm is triggered. Follow the instructions below.
A.Check Email to enable this function.
B.Set the interval period and time to send the emergency
C.Click 
to bring up the dialog box below to set up the email information.
55 | 56 |
