MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
Scheduler
Click 
Scheduler to enter the setup page for scheduler. You can schedule for monitoring, recording, or enabling network server by date or by weekday. Depending on your needs, after you set all the schedules, you can only enable the ones you currently need and disable the rest, which might be used later.
1.Enable
Check this to enable a schedule. Note that you still need to click
after you enable a schedule. Enabled schedules to monitor/record/enable network server are shown in 
/
/
, whereas disabled schedules are shown in 
/
/
.
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
2.Schedule Recording
You can choose to set the schedule by date or by weekday by selecting By Date or By Weekday.
By Date:
If you set the schedule by date, you can key in the date directly or
choose from the 
to add it to the
column. You can set multiple dates (max 60 days) for a single task. To take off a date from the column, click on the date you wish to delete and press [Delete] or [Backspace] on the keyboard.
By Weekday:
If you set the schedule by weekday, directly choose any day in a week. Multiple days for a single task are also acceptable.
You can only set future dates to for a schedule. Dates in the past are not acceptable.
3.Time
You can key in the start and ending time for the task in the following order: hour, minute, and AM/PM. Or use the up/down button to adjust the time. The start time must be earlier than the ending time. That means you can’t span the time to the next day. To schedule a task that covers more than 1 day, you need to separate it into 2 or more schedules for the same task.
61 | 62 |
